I have a BRAND NEW Anycubic Kobra X. And I've not had the greatest time.

I was told it should come with a Benchy but it didn't. NBD. Printed the first Benchy I found, in PLA+, no problems. (It was huge but printed fine)

So I needed a new basket for my ice maker. I found it here: https://www.printables.com/model/304473-magic-chef-ice-maker-replacement-basket/files

Doing a bit of research, I found a food safe PETG that would work. So I swapped the nozzle for another 0.4mm nozzle and fed the tube with the new filiment. I told the printer what the filiment was ( https://a.co/d/05LeDCya ), I loaded the model into the mobile app and it print. It shoved some spaghetti at my computer a few times (a basket for that will be my next print) and it started printing. But making the circles at the bottom, it wasn't sticking to the plate. I installed the Anycubic slicer and started playing with settings. Claude said the print speed was too fast. After 2hrs of trying to figure out what speed setting I needed to change and nothing different happening, I went to bed.

This morning I clean the plate with some iso pads and load the last model the slicer made. But now it won't print at all. On my last attempt, I could see that the print head looks like it's clogged. I have some chores to do and I'll go back and try to unclog it, but how do I get this thing to actually print? 

Anycubic Kobra X PETG print issues