Space Platform Set Filter Issue 2.0.73

I'm pretty green to Space Age and have built a couple of space platforms from a blueprint that I found on one of the large BP repositories. The first platform behaves as intended. It sends the filter signals to the asteroids collectors and it does it's thing and has been running hands-free for hours.

I made a second platform and decided to extend it to get triple the output (took the original BP and just added more foundation, moved some belts around...etc.) I could never get it balanced correctly so I started over on it. I copied the other platform and pasted it on the bare hub.

Now when I check on it, it's all backed up. The signals aren't setting the filters correctly. It just sends all 3 signals all the time. I've checked wiring, deciders, signals...etc. Everything is exactly the same as the first one. The lights for the signals turn off and on as expected but the asteroid collectors don't change filters.

I built a 3rd platform, did the same CTL+C, CTL+V from the first platform and it works the same as the first. Is it possible that something screwy happened with the hub since the filter signal is ran through it that is causing the filters not to act right? Here's a few SS's from the 2nd platform showing the setup and what the signals show and that the collectors have all of the filters set wrong. https://imgur.com/a/IYCBWc6 Any idea on what could be causing this? Also is it possible to completely remove a platform?