**2008 XLT SuperCrew**  
Long story, (sorta) short - I installed a new stereo and speakers in front and rear doors. All good.  
Added a powered subwoofer under rear seat. All good.  
Installed 4 channel amplifier (meaning I mounted it in the truck, also under the rear seat).  
REAR speaker wires: The connectors for the back doors had ample space where I could slip the wires through and route it through the rubber sleeve that protects the wires and into the door.  
PROBLEM -- FRONT speaker wires: running new wires to front door speakers proving difficult.  
I pulled the connector out and there is zero space to sneak the wires through that thing. (see pictures).

**QUESTION: If you have run new wires from an amp to the front speakers, how did you get the wires into the door?** ***(if you have not actually done this in a 2004-2008 XLT, no response necessary.)***  
If you somehow got them to route through that connector, please describe how you accomplished that - pictures would be very helpful.

Obviously, I prefer not to drill through the body, but so far, I am not seeing any other route to get them into the door.

Thanks to any and all who have info on how to get these wires into the front doors.

Running new front speaker wires - 2008 XLT SuperCrew