**LEGO Burning Blade – my first Sea of Thieves Mini Ship! 🔥🏴‍☠️**

After quite a bit of work, I finally managed to build my LEGO Burning Blade physically!

The photos show the finished model, with a few of them also featuring a size comparison with my LEGO Black Pearl. I've also included two videos in the comments below demonstrating the **Ashen Roar** function — one of them is in slow motion so the mechanism is easier to see. 🔥

Since I built this version mostly from parts I already had in my collection, **not all of the colors are accurate**, and some pieces had to be replaced with similar ones or are missing entirely. The overall appearance is therefore a little different from the original digital model.

I also didn't have enough string pieces to rig the ship properly, so the final model is missing the ropes. However, I did test **all of the ropes connecting the masts to the decks** and made sure they provide the necessary support for the masts.

The longer ropes connecting the masts to each other, as well as the ropes at the bow that would support the triangular sail, couldn't be tested because I didn't have the required string. If those ropes turn out to be too long, they can simply be wrapped around the masts to tighten them.

Overall, I'm really happy that I finally got to see the Burning Blade outside of a render — and especially that the **Ashen Roar mechanism actually works!** It turned out even better than I expected. 😄

**Hope you like it! 🔥**

LEGO Burning Blade in real life