I've been on this subreddit researching ways to adjust my boards up to allow for more pumping momentum but feel like I have not changed anything. I've tried changing the trucks to drop through Paris V3 with Knuckles Orange 87a on front and Paris 93a on rear. Then I added risers and switched to the Randall RII trucks but no longer drop through because the risers I bought did not allow for this. The current set up is Dervish board then risers wedges, with Randall Rii trucks, Stimulus wheels, Knuckles 87a on front and generic black barrels in the rear. I tried the Paris 93a gumdrop and barrel on the rear, but it seemed loose.  
  
I'm hoping to get started with pumping using the board and trucks that I have, and willing to buy lower priced things to help get me in the right direction. Thank you for the advice.  
  
Gear that I have:

**Boards:**  
Loaded Dervish Flex 2 (correct for my weight)  
Santa Cruz Pintail Cruiser (with a cool fire wizard graphic)  
**Trucks:**  
Paris V3 50 degree  
Randall RII 50 Degree  
Santa Cruz generic  
**Wheels:**  
Orangatang Stimulus 70 mm  
3dm Avila 75mm  
**Bushings:**  
Orangatang Knuckles Orange - 87a  
Paris Street Bushing - Orange - 93a  
Generic Black bushings - barrell and gumdrops - duro is unknown  
**Wedges**:  
Paris 7 degree Wedge Risers x2  
3d printed PLA 7 degree wedgers  
**Hardware:**  
various screen lenghts from 1" to 1.5"  
various flat washers and curved washers for the bushings

Tweeking Longboard to Pump - Advice