Finally up and running 3520w first system.

The only mistake I made, was the wrong mainline PV wire. I originally had 8 gauge and realized that that was a little small so it's now Marine wire 6 gauge, but I think I did a decent job for my first system. I ended up adding a second battery bank and although it's different brands it ended up being the exact same capacity I have two 300 amp hour energy batteries into 24 Bank so that's 300 amp hours. Then I have four 150 amp hours. Dumfume batteries and that's another 300 amp hours. So for a total of 24 volt 300 amp hours 14.2kwh one day I'll replace these with renogy, I used battery terminal fuses and all the exact same wire lengths between both packs and then it's hooked into the into the bus bar, I also upgraded the double 6 gauge cables from the 24v inverter to the bus bar 4/0 with a 300a terminal fuse right at the bus bar.

The 8 ja 440w solar panels are in a 2+2+2+2 10g wires into a combiner box and 6g to the victron 150/100

For the ground Mount what I did was made pressure treated 32"x8 ft platforms and then purchased rough cut 6x6s. I lag bolted the platforms to the 6x6s with 6 in lag bolts and I also added ground screws and I plan to add some more but in the case of very high winds I can actually lay these panels down flat, And of course the day I get it done it decides to rain and be foggy.

My VEVOR 5000w 24v inverter is on 24-7 with no issues, I'm only using about 25% to 30% overnight.

That usage will grow quite a bit when I add a 110v heat pump.