Hello everybody

So i always wanted to make a Tesla coil and at first I wanted to make a larger one using 4 mots in series but decided it was too dangerous and that I don't have enough experience so I decided to build a smaller one. In the photos you can see my schematic and stuff I already have. The flyback is tested and produces sparks that connect when i put the outputs around 1.5 cm close to each other. Here is the other stuff I am going to buy for it:

Online:

capacitors for MMC: [https://www.aliexpress.com/item/1005002616853937.html](https://www.aliexpress.com/item/1005002616853937.html)

Resistors for MMC: [https://www.aliexpress.com/item/1005011886443911.html?spm=a2g0n.productlist.0.0.7cd3GtXAGtXAVi&browser\_id=9b531bde29d0478ea465491bee6b68d9&](https://www.aliexpress.com/item/1005011886443911.html?spm=a2g0n.productlist.0.0.7cd3GtXAGtXAVi&browser_id=9b531bde29d0478ea465491bee6b68d9&) 10 megaohm

Coil for secondary: [https://www.aliexpress.com/item/1005006876140252.html](https://www.aliexpress.com/item/1005006876140252.html) 0.3 mm

  
From my hardware store:

A long metal pipe with a diameter of 20 mm (or more small ones) for the spark gap

Flexible aluminium vent

A plastic pipe (PP or PVC) with a diameter of 90 mm 400 mm long 

  
Other things like mounting hardware and primary coil i already have.

If it isn't going to work what should i change for it to work? If it is going to work what could I improve?

  
Thanks for answers.



Is my Tesla coil going to work?