Does Ampinel work on rtx pro 6000 blackwell edition?

I believe that the whole 12v-2x6 issue that applies on the 5000, and 4000 series of NVDA GPUs are equally applicable to rtx pro 6000 blackwell edition.

So far there are 2 kinds of solution: cutting off from the source, or load balancing.

Former relies heavily on alerting, cutting off power, and/or throttling.

Examples includes thermal grizzly wired view. Wire view pro 2 doesn't fit rtx pro 6000 blackwell. One version of wired view pro fit. As of today, I believe that the recently released wire view pro 2 wired will both fit well, and can sound off the alarm.

Another example is the corsair thermal protect wire. I believe that would cut off power when the temperature is too hot, again, correct me if I am wrong. Unfortunately it needs a 12v-2x6 socket on the PSU end for this to work.

Another example is MSI Ai1600TS, a new PSU released this year, again correct me if I am wrong. On top of the alerting and cutting off power, it can throttle power if you can run the software. Unfortunately I run ubuntu, so I am not sure about that.

Latter is, I guess, considered the best solution.

It properly load balances the current. Alerting and cutting off power completely protects the GPU when it is running hot and there is indeed imbalance issue, but it comes completely at the cost of, say, my local LLM workload. It would just stop completely, and or interrupt my workflow.

Throttling itself interrupts the workflow, esp if my LLM workflow is running at 600W.

The question I have is: I know ampinel type a fits rtx pro 6000 blackwell edition, but does it work? Have anyone paired the two together before?