[Tutorial] How to get Hackless Project M to work on SDHC Cards (SD cards greater than 2GB).
#I haven't seen any tutorials on how to launch the Hackless version of Project M with an SDHC card, so I decided to make one. This method uses an exploit called "Letterbomb" and is quite easy to perform.
What You Will Need
- The [Hackless] (http://projectmgame.com/en/download) version of Project M
- A Wii (This exploit will unfortunately not work for the Wii U)
- An SDHC Card (I recommend SanDisk)
- Your Wii's MAC Address and System Menu Version
- The Project M Launcher (you MUST use the Project M launcher. This method will not work with Gecko).
Steps
-
Download the hackless version of Project M or whatever build you wish to use and extract it to the root of your SD card
-
Go to your Wii's settings and take note the System Menu Version (Top-right corner of the first page) as well as your Wii's MAC address (Wii Settings > Internet > Console Information)
-
Go to please.hackmii.com and follow the steps below (here is a visual guide)
-
Select your Wii's System Menu Version.
-
Type in your Wii's MAC Address
-
Since the entire point of this is to avoid installing Homebrew, make sure to UNCHECK the box that says "Bundle the HackMii Installer for me!"
-
Enter the CAPTCHA and "cut" either wire (it doesn't matter which one). This will download a "private" folder.
-
Drag your newly downloaded "private" folder to your SD card. Choose to merge the private folder on your SD card with the one you just downloaded.
- Mac Users: since OSX does not have decent folder merging capabilities, simply drag the "title" folder (located in private > wii) and place it in the "wii" folder in your SD card like this!
-
Your SD card is ready to go! Plug it into your console and click on the envelope in the bottom right corner of the System Menu (the Wii Message Board).
-
If you see the red envelope, click on it. If you don't see it, try checking your letters from a day or two earlier (sometimes it can hide behind other letters).
-
If you followed the above steps correctly, the Project M launcher should show up and you can start the game normally.
Troubleshooting
- If you are unable to see the red envelope on the Wii Message Board, you may have entered your MAC address in wrong
- If your Wii freezes, you probably chose the wrong System Menu Version
- If Project M doesn't run properly or freezes, try reinstalling.
Additional Info
-
This method requires the SD card to remain plugged in as long as the game is on. If you for some reason unplug it, the game will most likely freeze.
-
I have only tested this method with a 4GB Kingston card as well as an 8GB SanDisk card. As long as the card is from a reputable brand (and readable by the Wii), it should work.
-
This method will only work on the Wii you set it up for. If you want to use it on a different Wii, you have to redo the steps using the MAC Address of the "new" Wii you're trying to use.
If you have any more questions about this method, feel free to ask.
EDIT: Just to clarify, this method is hackless and makes no modifications whatsoever to the to the Wii. Letterbomb is used to get to the Project M launcher from the Wii System Menu rather than through the Stage Builder.
Posted Mar 21, 2014, 10:47 PM UTC · edited
I know people want to use their SDHC cards, but this defeats the whole purpose of a hackless option.
Might as well use the homebrew version if you're going to do this.
Uh, this is a hackless option. This does not require the installation of any Homebrew software and makes no modifications whatsoever to the Wii. The only significant difference from this method and the "traditional" method is that you launch it from the Wii Message Board rather than the Stage Builder.
Erp, my reading has failed me today. Sorry!
I didn't know you could use letterbomb to launch things other than hackmii.
No worries, I've updated the OP just in case other people were confused as well.