r/auto•
lovehate

09 Aveo fuse keeps popping, how to locate the short?

TL;DR - 10a fuse for blue wire that runs the length of the car keeps blowing, is there an easy way to locate or at least narrow down the point of concern?

I posted a bit ago about my lack of insturment panel illumination; after a series of duh moments and noticing the how-could-those-possibly-share-a-circuit chance of my front right marker light (which I assumed to have been a bad bulb) not working, I've discovered they in fact share a fuse. After discovery, I checked all of the bulbs I can easily reach on that circuit, which include my front right marker light (the same bulb's turn signal function is fine) my back right tail light, my license plate light (which still works somehow?!) and my instrument panel and console illumination. I went in with my multimeter and found a solid blue wire that seems to go to both the FR marker light and the BR tail light, both have zero load (which would make sense, as the fuse is blown).

Is it reasonable to assume the short would be on that wire, if all of the other wires are still reading correctly? The 10a fuse under the hood that keeps popping is frustrating me greatly, and I feel strongly that this short is the cause of all my trouble. Other than pulling apart the entire car, I'm not exactly sure how to trace it other than the spots I can easily see.

The previous owner had at least one dog, based on the hair I've found on the inside of the dash and in the hatch. It apparently spent an equal time in the driver's lap and in the hatch, coincidentally where the exposed wires run, so I've focused my search on those two areas for damage. There was no evidence of water or moisture in any of the light fixtures.

Is there a method of common sense or electrical knowledge that would help me better identify where I should be looking for the short? I've got a multimeter and that's about it, with the fuse being blown and no power getting to the devices, I'm not sure of how to test or what to test for at the termination points.

Hopefully you guys can save me a trip to an auto electrician. Thanks in advance.

Posted Mar 27, 2014, 9:32 PM UTC

411
jamesmech•

First, you will need a really good wiring diagram for that car. Your assumption about that blue wire, possibly, being shorted is a real possibility, but, unless you know where it goes or what else it feeds, anything short of seeing the short let out the smoke is going to be a wild assed guess. They sell short finders that look like a simple gauge that, if you run it along the suspect circuit, can, at least, point you in the directions of the short. They sell expensive, far more sophisticated versions, as well, but I've always used the cheap ass short finder. You can also tell where the short is, sometimes, by holding the harness that the wire is located in. It will definitely be hotter than the rest of the wires in the circuit, unless that particular wire is shorted to another neighboring wire (Which happens a lot, just before the fire starts.). I do have to repeat, you need a really good wiring diagram, before you start. Here, also, is a link to the tool I use to find shorts: http://www.tooltopia.com/tool-aid-25100.aspx?utm_source=google&utm_medium=paid_search&utm_campaign=paid_search_google_pla&scid=scplp6826385&gclid=CKS82pPcs70CFcg7OgodcFIAsg The canister looking thing with gator clips is a circuit breaker that you put in place of the offending fuse.

3
lovehateOP•

I've got a buddy with a fox and hound tool; I assume that'd be one of the more sophisticated ones? Hopefully he knows how to use it. This is honestly the first time I've had to deal with electrical issues in a vehicle and it's a tad overwhelming. Would a Haynes manual be the most likely place to find solid wiring diagrams? My Googlefu turned up very little, mostly diagrams for either the wrong harnesses or the wrong model of Aveo.

Edit: Nothing listed on the Haynes' website for Aveos at all. That's a bummer.

1
jamesmech•

You might be able to talk a tech or someone at a dealer into giving you a a copy of the relevant pages for the circuit.

2
lovehateOP•

Worth a shot. Appreciate it!

1
jamesmech•

any time

2
redwingvksm•

I LOVE THESE!! Well, I think 09 is the same.

Open the fuse box under the hood (driver side by the firewall.) There should be a white connector in the side of the fuse box closest to the fender. This is a bus bar for feeding a lot of interior lights. VERY, VERY common issue I have with these is that they get warm and the cheap plastic actually starts to melt into the connection, generates more heat, and now you start blowing fuses. You gotta get that white bus bar connector separated and look in. If it doesn't easily come out, you'll have to pry. And I mean HARD. I've had to chip out some to fix it. I have a portable sand blaster so I blast the bar/connector and its all good (metal never gets damaged, its the cheap plastic that makes the bad connection.

Get that bar out, get a new one from the dealer and you'll be all set.

2
lovehateOP•

I wish it was as easy as the splice packs! Unforunately, they removed the splice packs in the gen3 aveos. The gen1 and gen2 were notorious about the splice packs getting burnt up, so they removed them; my problem seems to be user-created rather than a manufacturing defect, which is surprising. Thanks for the try though!

These are the exterior fuse boxes for the gen3s.

2
redwingvksm•

Aw. Well, if you can wait till 9-10am est I can get you a wiring diagram from alldata.

2
lovehateOP•

That would make you my new hero! I actually won't be able to take a real crack at it until probably Saturday or Sunday anyhow, depending on when the buddy can loan/teach me his fox and hound tool. I really appreciate it. It's the 2009 Aveo5 LT, if that matters. Thanks a ton!

2
redwingvksm•

I hosted it on imgur as a .gif file.

Hope this helps! It's for the interior lights.

http://i.imgur.com/DnaosPY.gif

2