DNA30, Batteries, and Resetting

So, I've been using my ZNA with NCR18650PF/PD & AW18650 IMR since I got it, but more and more I am running into the device resetting while I am firing it. According to the DNA30 datasheet:

Device resets: If the battery is not able to power th e device at the desired setting, or the bat tery is excessively discharged, the device may go immediately into a low voltage shutdown. If firing the device causes the screen to blank out and then d isplay the welcome screen, you should charge, replace or upgrade your battery. This is especially common at power settings above 20 watts.

I'm getting this behaviour even from a pretty fresh battery. Should I be expecting only a few hours of life from batteries that are about 3 months old? What sort of battery can I purchase that will ensure maximum life? I've read that the DNA30 calculates the battery life based on wattage selected and not the standing voltage, so would grabbing a VTC5 (I know a lot of flat tops don't work in the ZNA, I've looked into it thoroughly and found several reports of VTC4/5+ZNA) be the best option for the available amp draw? These NCR's are rated at 10A which is the limit of the chip itself, but I'm thinking it would take longer to hit the resetting point as well as stop giving me that "weak battery" & "check battery" when starting up all the damn time if I had a higher amp limit on the battery. Oddly even the AW's with their 16amp give me these messages.

Posted Apr 22, 2014, 11:05 PM UTC

59
Loading comments…