[Build Help] Make build more portable.
Hey you guys, before I start, my PC is already built and I don't need any help with building one, I'm here asking for some advice on a new case and some new parts to fit the smaller case. And by smaller case I mean something I can carry pretty easily between two places without it being a big pain.
Here's my list of current components:
-
ASUS Z87-A (ATX)
-
MSI GTX 780Ti (reference card)
-
SilverStone Argon CPU cooler SST-AR01
-
Kingston V300 2,5"
-
Seagate Barracuda ST1000DM003 3,5"
-
Samsung HD103SJ 3,5"
-
BeQuite Kraft 600W
Tell me if there is anymore information that is of importance when it comes to sizing or what ever.
The case that I currently use is the Fractal Design Arc Midi R2, it's too big for me and I don't use most of the space it has.
So I'd appreciate any kind of help, recommendations of cases, new ITX mobo. What ever makes it possible to transfer to a ITX case.
Posted May 4, 2014, 11:55 AM UTC
The case I'm currently looking at is Lian Li TU100B, I really love it and it'd be perfect for me. But I'm not sure what components I would have to switch out with smaller ones to make it work.
The Lian Li TU100B is a very nice case for portability, but you'd pretty much have to ditch your entire current build to get hardware that would fit into it. Nearly all your hardware is too big to fit into the Lian Li. First thing that would have to go is obviously your motherboard because it's ATX sized. 2nd thing that would have to go is your PSU because the Lian Li uses an SFX sized PSU.
3rd thing that would have to is your heatsink thanks to the layout of the case where the PSU is located right above the location where the heatsink would normally go, and then you got number 4 which is your graphics card... This Lian Li needs a graphics card that is designed to go inside of a mini ITX case so there's no way that a full sized reference design 780ti will fit...
The Lian Li is a nice case, but if you want to keep most of your hardware and maintain a good level of portability then I recommend that you go with the BitFenix Prodigy. You'll be able to keep all of your hardware except the motherboard. It's a little bit bigger than the Lian Li and can actually be used as an M-ATX case due to it's size, but if you want to save the most money and still have a portable build then the BitFenix is probably one of your best bets that will fit a full sized graphics card and power supply.
Only thing you have to watch out for with that case is the motherboard layout. Some mini-ITX boards have the CPU chip close to the GPU which can cause a problem with the heatsink. Sometimes it won't fit or it'll be too close to the GPU and can cause the risk of a short on the GPU if it isn't properly protected so try and get a motherboard where the CPU is more centered than most mini-ITX motherboards. The ASUS Maximus VI Impact is a little expensive, but it will offer you the most features of any mini-ITX board on the market and will probably give you the best bang for your buck in the long run. Anyways I hope that helps and here are some links to the ASUS motherboard and Bitfenix Case on PC Part Picker for conveniece.
http://ca.pcpartpicker.com/part/asus-motherboard-maximusviimpact
http://ca.pcpartpicker.com/part/bitfenix-case-bfcpro300wwxkwrp
EDIT: But if you want to absolutely go with a Lian Li case then it might be best to take a look at this one since it fits a standard ATX sized PSU and full sized graphics card. Sure it doesn't offer a handle like the other two options this is where you use a little human ingenuity. Have you ever considered how easy it would be to screw a handle in the top of the case? All you would need to do is buy a handle online, drill a few holes in the top of the case then screw in a couple screws and washers and then you're done!
http://www.lian-li.com/en/dt_portfolio/pc-q25/
Okay, I'd like to start out by saying thank you so much for your reply and for taking the time to help me out. I knew the Lian Li case would need almost all of the parts replaced to be used, so I'll have to accept that fact and skip that case.
Do you have any experience with the Prodigy? I've heard a lot of good and a lot of bad about it and I'm not sure what to think of it. It's probably a great case but I'm worried about the handles on the top breaking 'cause of the weight. But if the handles can handle it, the case would be perfect.
I'll have to look around with my friends and family to see if anyone of them has a Prodigy so I can check out the size.
EDIT: Also, what is the difference between the Maximus VI that is m-ITX and the one that is m-ATX other than an extra PCI-E x16(?) port?