Cable management?

I regret buying a straight cabled pair of ATH-M50s. Is there any way to shorten the cable using ties/rubber bands/etc.? Thanks, it's hard to take them places because of the 10-foot cable.

Posted May 13, 2014, 12:31 AM UTC

87
ADC328DFDT990 600Ω | Schiit Magni V1 | MEE M-DUO | AKG K553 Pro•
6
clitmasterOPSONY MDR-V6, ATH-M50S•

Are there no other tutorials for this? For whatever reason, I just don't seem to understand the video -- it doesn't really show how the initial setup is clearly.

1
andysaurus_rexFiio E9/E7--> K7XX--> QC15--> VSD3s•

here is the video

1
ADC328DFDT990 600Ω | Schiit Magni V1 | MEE M-DUO | AKG K553 Pro•

How's this?

https://www.youtube.com/watch?v=LsQ2f9E99bQ#t=32

"Braid a single rope" or similar search terms will help.

1
HamyHamA700*M50RD*A900x*K702*DT880(600Ω)+CMOY*M&M stack*T1+Carbo Basso•

Just braid them.

Or bring it by and I'll braid them for you.

http://imgur.com/Wln0MS5

Not the best picture, but I braid all my cables to make them shorter and more manageable.

1
andysaurus_rexFiio E9/E7--> K7XX--> QC15--> VSD3s•

I hear ya. I'm so glad I went with the coiled version. For my HE-300 though I used some twist ties to keep a coil together. There's still a loop halfway between the headphones and the plug, but the 10 feet was shortened to about 6 (you can coil it more if you want though). Also, braiding it is a very good option.

1
veni_vidi_valeDo audiophile androids dream of electrostatic sheep?•

Braid, or cut to length and solder on a new connector. You can get a decent connector for just a few dollars. You don't need to have mad soldering skills to solder the cable to the connector, just a reasonably steady hand :-)

1