Fixing 10/22 barrel droop

After learning that brownells.com ships to Canada, I went ahead and ordered some upgrades for my ruger 10/22 that I'd had my eye on for awhile. Specifically a volsquartsen trigger group, and a new stock that allows the barrel to free float. The upgrades have done wonders for the accuracy of my gun, except for one rather big problem, my barrel droops so low I've run out of vertical elevation when sighting my scope and I'm still half a foot from where I need to be.

I understand this isn't an uncommon problem with ruger 10/22's, so does anyone have any experience with how to resolve it, or where to get the parts I need to fix it within Canada? Quite frankly, ordering from brownells is too expensive for one or two small items.

Posted Aug 5, 2014, 2:56 AM UTC

56
badlife•

Your wish is Tactical Solutions' command.

By a remarkable coincidence, I have my SR22 all out in pieces so I can slather it with Fireclean, and I thought 'while I'm wasting money on this piece of crap, I wonder what other junk I could throw into it'.

PS: That sounds like an absurd amount of barrel droop. Are you sure your scope is mounted properly?

1
matchpointOP•

Thank you.

It took me a little while to figure out what was going wrong with my rifle. When my parts arrived in the mail I felt like a kid on Christmas morning opening them up. I wasted no time in putting them in my rifle and heading to the range, but when I felt that last click on my scope I had a hard sinking feeling in my stomach - I had no idea what was wrong. The scope had worked perfectly before I installed the new trigger group and stock, and neither it nor the rail had been removed from the receiver when I had worked on the rifle. I left the range frustrated and sad that day.

I've disassembled my rifle, rail, and scope and ensured everything mounted correctly, but the results were still the same.

Fortunately, you don't have to search too hard on Google to find numerous posts from American shooters who've encountered the same problem. From my understanding its just a design flaw in the rifle that most 10/22's encounter when they try free-floating the barrel.

1
badlife•

Gotcha. Thanks for the additional info. I've been thinking about a custom 10/22 build some day, so that'll come in handy.

1
Styrak•

Is the 10/22's barrel attached so poorly that it's that loose, and droops?

1
alkali_feldsparI 3D printed a gun.•

Get an adjustable v-block, and glass bed the first 2" of your barrel once the droop is fixed.

1
EinGuyBecause Canada•

It's probably a crooked receiver. Or rather, the bore they drilled in the receiver for the barrel is crooked.I've seen a few 10/22's with this problem in the past year.

1