XombinApril 18th 2014•

Use a small magnet

2
[deleted]•

[deleted]

2
Ender_Fedaykina van down by the river•

In stock... SmokTek

2
RaltOPSig150+ Silverplay/MXv4SubΩ•

Thank you so damn much.

1
CrotchetyBOFHVapor Flask DNA 40•

Running a VTC in your ZNA? :D

2
RaltOPSig150+ Silverplay/MXv4SubΩ•

VTC5, LG35A, Efest35A, I just really like High Amp batteries, I'd rather be as safe as possible.

/edit

Another release day ZNA carrier! Take a pic and show me, I'm curious how you have yours setup.

1
CrotchetyBOFHVapor Flask DNA 40•

I'm not too worried about it. The DNA 30 is spec'd to have a max 12A draw on the battery, and has all kinds of battery monitoring to make sure it doesn't take more than the battery can give. The AW 18490 can do 16.5A, so that should be fine. I've even successfully run it at 10-12W on an 18350, just for giggles. The "pinky rest" provided by the ZNA body is no where near as comfortable as the one provided by an 18650 tube, though.

Today it's in dead stock mode. Antique bronze 490 tube with AW IMR 18490. Pyrex RSST - mesh/0.5 ribbon at 1.3Ω, Castle Long Reserve at 12.9W, switching out for a Kayfun Lite + with Vanilla Custard Pie from Vapeshack 808 in Hawaii.

Some days I'll run it with the Graphite Aluminum 18650 and either a 1600 mAh (20 A) AW or 2000 mAh (10A) AW, depending on if I'm dripping or running a kayfun or genesis.

Mine was an early model, and I "tested" the reverse battery protection by correctly inserting VTC4, Panasonic CGR, MNKE, etc to see if they'd make contact. They all did without problems, so I knew I had to be VERY sure I didn't put a battery in backwards. A while back I noticed that it seemed to be detecting that batteries were "dead" way before they should be, battery that wouldn't even fire at 7W would read 3.9V when removed, so I sent it in and they replaced the wiring and redid the solder points. 5 days round trip time, great service.

They also (good or bad is your decision) corrected the iffy reverse battery protection with a taller delrin cup, so now, I've verified that no flat top batteries make contact, and presumably, I wouldn't fry the board if I managed to put in a battery backwards, I'm not going to test that. They also upgraded my 510 to the new dual adjustable copper contacts.

2
RaltOPSig150+ Silverplay/MXv4SubΩ•

I had the same work done on mine. I had some autofire issues and they re-did everything and put a new chip in mine. I lost the Serial#23 but I gained a working LDE! I also noticed they made the delrin protector work a lot better and the 510 that adjusts really is nice. I was using VTC5's regularly... but not anymore! I gave a bunch of VTC5s to friends with mechs.

I have been using the ORB25 but they have discontinued their Button Top version, so I'm going back to flat-top with an adapter. The AW just don't have enough mAH to placate me :( I already roll around with 5 18650 batteries for a single day, I cannot imagine going back to 2000mAH.

Here's mine today, love the damn thing to death. http://imgur.com/ixcfJuE

1
CrotchetyBOFHVapor Flask DNA 40•

Yeah, they didn't need to replace my board, so I've still got #39. I have seen LDEs be anywhere from 18 to the 300s for their original number, though. Meh, it's really only for warranty purposes, anyway.

Here's the Zen stuff I have with me today

I dunno, crucifixions for having that much of it? LOL

2
maximumlumens/R/BATTERY_TESTS/•

As others said, a magnet works. You can also solder a brass button. Unfortunately the owner of that shop is off for about a week to move, so it might as well be out of stock if you want it now.

1
lnsplreCloupor Mini + Subtank Mini•

I use these on my VTC4/5's in my Provari and they work fine.

http://www.radioshack.com/product/index.jsp?productId=2102642

1