Portable Observatory
The full album is here.
This is something I've been working on for the past two years. Before this, I came very close to putting money down to build an actual roll-off roof observatory on a Bortle 3/4 site a few hours-drive away. Having a permanent telescope setup makes a lot of things very easy, but I was never really comfortable with the idea of leaving all that equipment off by itself. And even though light pollution is terrible here in the city, there's always narrowband imaging!
So a trailer seemed like a great compromise. The telescope stays set-up inside, and I can drive it out to whatever dark site (or star party) I might want to. Last night was its maiden voyage.
Two views. The body itself is a pretty standard steel-frame "sport" trailer. It's 6' wide and 12' long, and the roof in the rear 6' is removable. The 'wings' in the rear bring the actual wall width closer to 7', and give the telescope plenty of room to slew around (as long as the trailer is oriented roughly north/south). Currently the roof must be manually lifted off using those aluminum poles that stick out on either side. I'm hoping that can be upgraded into something that rolls on/off later on.
Power in the field is supplied by two 300Ah AGM batteries. Everything in here is 12v DC, and for the things that aren't (the laptop is 18v, and the mount is 48v) I have converters. Running all systems, the current draw ends up being about 15A. In the future, a solar charger will help extend the length of time this can go without being plugged in.
And here's the telescope parked inside the trailer. The black disks beneath it are a rotator plate that lets me align the telescope no mater how the trailer itself is angled, and below that the steels coils isolate the telescope from vibration on the road. When the trailer is parked, four 5000lb screw jacks lift the steel platform the telescope pier rides on up off the trailer's floor to keep movement inside the trailer from shaking the image. That part only kind-of works right now; there's still a lot more shaking that I'd like.
For the cost, the custom trailer with its power system and cabinets probably comes to around $15000, more than the roll-off-roof observatory would have cost. It could probably have been done for less, but I made some costly mistakes early-on (note: just because a telescope can fit inside a space doesn't mean it won't crash into a wall when you try to slew). For anyone interested in putting up an observatory, this sort of thing is definitely an option, especially if you don't have the land (or the skies) for something stationary.
The first-light images went okay. Focus was a soft, and I think I need to spend a bit more time on collimation, but I really need to work on fully isolating the telescope from the trailer itself. The way moving inside the trailer shakes the telescope just isn't good. I'll keep working on that. So in the end, this is still a work in progress. But it's getting really, really close!
Posted Sep 13, 2014, 6:13 PM UTC