VoiP Phone Mac showing up in Data and Voice VLAN

Cisco 7965 phones running 9-4-2-1 SCCP firmware. Cisco 3750 switches runing 15.0(2)SE6. Being mandated to switch to Dot1x and MAB to authenticate all our client machines and IP phones. It's an issue with phones with PCs behind them. The phone's mac address populates the mac table in both the data and voice vlan thus err-disabling the port when the PC attempts to authenticate. What do?

Posted Nov 6, 2014, 10:35 PM UTC

13
chuckbalesCCNP CCDP CCNA-Voice•

I've never done MAB, but I found this Cisco doc on MAB w/ Voip that may or may not be useful

1
altrg173•

When the phone boots up, It is not aware of the Voice VLAN initially. Frames are sent without tags and the MAC ends up on the data VLAN. Once the phone boots it should only show up on the Voice VLAN. I remember in 12.2 code there was a bug with this where it never cleared off the Data VLAN. I am not sure if that is true of any 15 code.

You can also try using: switchport port-sec maximum 3 switchport port-sec max 1 vlan access switchport port-sec max 1 vlan voice switchport port-sec mac-address sticky

1
OrsonScottHardOP•

Yep. Fully aware of all that. Was hoping someone has had similar experiences. I've tried all the obvious "fixes" and anything that's easily googlable.

1