How flat glass is made (by floating molten glass on molten tin)

[GENERAL]

Posted Nov 21, 2014, 6:32 PM UTC

28058
ghatttersMechanical•

And how is that perfectly flat pane of glass turned into a curved and laminated windshield?

Just like this http://youtu.be/fg3moEI9V5g?t=22s

25
deletecodeOP•

Neat stuff. I like the trays they use to bend the glass, with weight-actuated benders. Nothing is more reliable than gravity.

7
jester456•

I beg to differ ;)

3
[deleted]•

[deleted]

0
planx_constant•

Remember to stop before the next "How It's Made" video comes up... DAMMIT.

Well, nevermind sleeping.

2
mabahoangpuetmo•

Slightly updated video with an American accent and higher resolution:

Pilkington North America

9
Neko-samaSystem Architect •

Most of the same script too

5
[deleted]•

[deleted]

1
aggierandy•

Some cool facts I know about this, Gas outages can be expensive, oil burners are on standby in the event of an outage. The process can be switched over and controlled within a few hours.

Oxides on the tin are a big deal causing surface defects, a lot of sophisticated chemistry occurs in the bath. Particularly in a small triangle where the glass lifts off the tin and into the rollers. Additionally, metals are used to generate the substrate colors further adding to the bath chemistry. Solving issues with tin chemistry is tough.

Stretching rollers control width, but speed controls thickness. Faster is thinner.

Tanks (the furnace) are usually rebuilt every ten years. They are made out of special sophisticated ceramics. Many are designed to be sacrificial and are actually being integrated into the glass over time.

Shutting down the furnace for a rebuild is a complicated matter. As you empty the tank and the volume of glass in the tank decreases, the heat applied must also decrease or you'll melt the furnace flooding the plant with molten glass. If this happens, water lances are used to cool the melting area and resolidify it. I've seen some crazy pictures and videos of this.

In packaging, a polymer bead is applied to the glad to prevent etching. Those big stacks of glass weigh thousands of pounds, if one falls on someone out flattens them completely. This has happened at multiple plants.

The most exciting advancements in glass are coming mostly from coatings. Tint changing, self cleaning, smog cleaning, low e.

Finally this video is really old. The process is very modern and monitored by thousands of sensor that constantly grade the glad and determine its quality.

9
Shanacan•

I can expand on some of what you said. I wouldn't call the furnace refractory sophisticated. The furnace structure is largely made out of plain silica brick. The rest mostly AZS. The silica melts at about 3000 degrees F, and operation temperatures run around 2960, so it is critical to maintain control of the fuel input to not over-heat the furnace.

Glass leaks can happen any time, usually towards the end of furnace life, when the refractory is most worn. It's always an exciting task to get water lances on the leak as fast as possible. The leaks that occur during cool-down are more due to the glass body heating up, like you said. This causes a significant decrease in viscosity, so a crack that may not have been a leak before can turn into one with hotter glass.

The more interesting part about shutting down a furnace is the thermal contraction. There are large jack bolts that need to be tightened down on the steel support structure so that the furnace doesn't collapse. This must be reversed during a heat up. The cool down takes about a week and a heat up takes about 3 weeks. A full repair takes 3 months. So a furnace will run for 15 years straight and only go cold for a repair for 3 months.

The video linked below from the US was shot last year, so this video might not be as old as you think. I would say the factory is an interesting mix of new technology (on-line glass inspection, and coatings) and old equipment that hasn't been replaced in 40 yrs.

You're right the glass packs are extremely dangerous, not only for crushing but also severe lacerations. The glass can cut to the bone if one of the large plates breaks in half and lands on someone. (it's called a guillotine)

4
aggierandy•

Thanks. I've only been out to my dad's plant a few times but he shares tons of stories. I didn't watch the video from the US. Just saw those ancient computer screens and knew those were antiquated. Sounds like you work in a plant, are you in Texas by chance?

1
rdesktop7•

Fascinating.

I realize that they use a environment of "nitrogen and hydrogen" over the tin to keep it from oxidizing, but at the end of the process there, the line is exposed to air. I wonder how much tin oxides they have to deal with, and how. I suspect that somebody periodically needs to come comb the oxides off of the tin bath.

That's a lot of tin.

7
_The_Editor_Chemical Process•

Anyone know why hydrogen is in there too? I would have thought plain old nitrogen does a great job on its own at bring an inert barrier gas, whilst being a lot cheaper.. Only thing I can think of is H2 being used as a scavenger to mop up any eronious O2 that makes its way in...

11
Shanacan•

That's exactly what the hydrogen is used for. I actually work as a process engineer at a Pilkington float glass plant. The glass ribbon releases a small amount of oxygen, the hydrogen is there to clean it up.

9
_The_Editor_Chemical Process•

Ahh good stuff! Glad to hear I'm not losing it yet ;-)

1
rdesktop7•

That's a good guess.

IDK, I would like to know the answer here.

3
LukeSkyWRxCeramic Engineering R&D•

It doesn't take much H2 to reduce tin oxides they are not very stable . The end of the float is where they apply thin films to the glass for energy efficiency reasons (IR barriers) they are typically stacks of metals and insulators, they need a reducing environment for the process.

3
Shanacan•

Yep, the tin oxides are combed about every eight hours, more if needed. It's a small amount, typically, but can be a lot if there are any process upsets.

4
beskidtbawler•

Combing tin oxides of a giant molten tin bath. Doesn't sound like a dream job.

3
rdesktop7•

Yeah, that really doesn't

I can imaging a huge amount of IR in the environment.

1
jlink005•

Quick, someone bring this to Mike Rowe!

1
LukeSkyWRxCeramic Engineering R&D•

They pull it off the tin before exposing it to air, at least at the float plant I have been to.

2
1percentof1•

Positive pressure, no air gets in.

2
rdesktop7•

I suspect that it cannot be too big of a positive pressure with that 2 meter by 0.5 meter hole in the end of the kiln.

Sure, I think you are probably right, I still suspect that some oxygen would get in there to create some tin oxide, and thus require periodic combing.

Anyhow, It would be quite interesting to see this factory in person.

1
banglesjuggler•

I use to work installing glass balconies and handrails and it got pretty nerve wracking handling $500 glass sheets for million dollar projects when you're making $11 an hour. It's a good thing the company we worked for expected glass to be broken and we were usually good enough to only smash 1 or 2 during a project.

7
deletecodeOP•

Were these $500 sheets for below the handrails, or were they meant to be walked on? That is really expensive and I am guessing they were super thick and made of special glass. For thinner ones from china it seems to be less than $5 per square meter.

5
banglesjuggler•

We did both. The ones that went under handrails were usually 1/2 to 5/8" thick, waist high, anywhere from 3 to over 6 feet long, and from 40 to 200 lbs (I use to joke with my bosses that the designers were limiting themselves to what the human body could lift when that staircase was being assembled). Those were comparatively cheap, maybe $300+ for an average one. I also got to work on a project that used curved frosted glass running up the sides of a 2 story floating staircase, those where $1000 each and took weeks to make so we had to extremely careful hanging them over the side of the unfinished stairway. And I also got to do a staircase made almost completely out of glass (the stringers were hidden underneath glass steps), the steps were 3 1/2" plates of glass sandwiched together with adhesive to keep them from separating in case one broke, those were $500 each with landings made in the same manner that were about 4 by 4 feet and weighing over 300lbs each (now those were, I'm not even sure but they were at least $2K each). That was a fun job but the hours and travel were murder on your personal life.

3
deletecodeOP•

Sounds like you were building really impractical things that really shouldn't be made of glass. But on the bright side, if the glass doesn't break, it should last thousands of years and could outlast the metal holding it together.

Glass stair cases look really cool, I have to say.

2
banglesjuggler•

They were vanity projects. The kind of things people would take pictures in front of and show in the brochures but in the end would just take the elevator. Rich people are weird sometimes.

3
westhest•

I've been to a one of these places for some energy recovery work. The process itself is amazing but what blew me away was the level of redundancy for ALL systems. Like a minimum of 4 levels of redundancy. Like having 3 back up furnace burners, to having 3 days worth of natural gas storage in case they loose supply from the utility, to having 3 separate backup nitrogen systems. And all redundancy iterations are for full capacity.

The plant manager said the furnace hasn't stopped in 8 years and it's his job to make sure it doesn't stop for another 15.

Every day of stopped production costs them several million dollars.

And that furnace was huge. The spent a quarter million a month on natural gas.

Looking inside was intense. But very cool.

5
deletecodeOP•

4 levels of redundancy on everything.. 8 years uptime.. holy shit. I wonder if there are any other processes where you just cannot shut it down. Maybe the production of single crystal silicon, but even that seems to be easier to shut down.

Someone else was commenting on how painful it is to restart these systems.

I am also curious about the energy recovery you were doing (knowing little about the subject). I'm guessing you were recovering energy from cooling down the glass. Would that heat be used to pre-heat incoming materials, or just converted straight to electricity?

5
dmanww•

Aluminum smelters.

5
oneonetwooneonetwo•

Yeah, anything which involves the word "molten" tends to get run as continuously as possible.

2
neanderthalman•

That's pretty much the main problem we face with nuclear power. We can 'shut down', but can't take it down to zero.

We obviously have similarly crazy levels of redundancy. Our plant has six sources of electricity we can draw upon, and four sources of cooling water.

What we don't have is the uptime for production, as only the critical safeties have this kind of redundancy. I'm not sure I'd like to have it for production as it could conceivably have a negative impact on our safety culture. The production pressure would be enormous.

3
westhest•

it could conceivably have a negative impact on our safety culture

Definitely. Though this place wasnt as bad as some plants Ive been to, you could definitely see that production capacity was the number one concern and safety was secondary. This is actually true for the vast majority of facilities Ive seen.

1
westhest•

This project was looking at removing heat from the furnace exhaust (a shit ton of gas at like ~650 F if I'm remembering right) to pre-heat the raw materials going in.

Though there is a lot of energy available to recover, converting it to electricity, especially at such "low" temperatures is really not practically or economically feasible.

Usually a better option for facilities that have both large electrical and thermal energy demands is to install a co-generation system (CoGen). Which is essentially burning natural gas in a gas turbine or reciprocating engine turning a generator and capturing the heat in the exhaust and cooling water jacket to pre-heat the feedwater for a boiler or other thermal loop. All the energy that they can utilize from the exhaust and jacket would have otherwise had to have been provided by burning more gas.

GE has recently been producing high compression ratio reciprocating gensets that, when installed in a CoGen set up that can utilize all of the heat, can have a total system efficiency of 95%! Compared to the typical electrical efficiency of a modern combined cycle utility power plant (~40-45%) thats getting a lot more bang for your buck.

2
hanzyfranzy•

I want to meet the engineers that came up with this process. Just wow. Engineering at its finest.

4
Nemo222•

Float glass is one of the coolest manufacturing processes that exist. The nature of the process makes the resultant glass nearly as flat as a reference surface.

3
kksgandhi•

What is a reference surface?

2
TheSmoosh•

A reference surface is something that is really flat. Labs will sometimes have a big slab of granite that has been ground to an extremely smooth, flat surface for use in doing fine measurements of objects with precise height gauges and such.

7
kksgandhi•

Thank you.

1
Nemo222•

For metrology, they are surfaces ground to a certain flatness to a high degree of precision, usually better than 0.0005" over their entire surface they are made of granite usually and are massively heavy and expensive.

3
kksgandhi•

Thank you.

1
LukeSkyWRxCeramic Engineering R&D•

Liquid tin

1
omatto•

Anyone know where I can pickup the soundtrack?

3
turbodsm•

I've been to a flat glass plant in KY. They said after starting up after a major outage to rebuild the furnace, it takes a week or two to get everything lined out so they just break the glass. There are cameras everywhere that catch glass defects. They get marked and dropped off the line, broken and recycled. There are conveyors under the production line that send the glass back to the beginning automatically.

You can see the piles of glass here

3
EACCES•

What's in that big network of bunkers? to the east?

2
turbodsm•

Like a mile east? Its govt property.

2
EACCES•
1
autowikibot•

#####

######

#### Blue Grass Army Depot:


Blue Grass Army Depot (BGAD) is a U.S. Army storage facility for conventional munitions and chemical weapons. The facility is located in east central Kentucky, southeast of the cities of Lexington and Richmond, Kentucky. The 14,494-acre (58.66 km^2) site, composed mainly of open fields and wooded areas, is used for munitions storage, repair of general supplies, and the disposal of munitions. The installation is used for the storage of conventional explosive munitions as well as assembled chemical weapons. The depot primarily is involved in industrial and related activities associated with the storage and maintenance of conventional and chemical munitions.


^Interesting: ^Battle ^of ^Richmond ^| ^Lexington ^Army ^Depot ^| ^Kentucky ^Route ^21

^Parent ^commenter ^can [^toggle ^NSFW](/message/compose?to=autowikibot&subject=AutoWikibot NSFW toggle&message=%2Btoggle-nsfw+cma1nge) ^or [^delete](/message/compose?to=autowikibot&subject=AutoWikibot Deletion&message=%2Bdelete+cma1nge)^. ^Will ^also ^delete ^on ^comment ^score ^of ^-1 ^or ^less. ^| ^(FAQs) ^| ^Mods ^| ^Magic ^Words

1
aggierandy•

My dad operates one of these plants and has worked there for 40 years. Any interest in an AMA?

3
Bupod•

The inside of the heating chamber and molten tin bath look beautiful in a way. Very interesting process!

2
Bottled_VoidAvionic Systems•

I grew up near St. Helens, so I got to go on a tour of this when I was a kid. Was pretty good.

2
classactdynamo•

Why do industrial process demonstration videos always have that same hokey background music?

2
rs-485•

I like it, it sounds good. I want more of it!

1
Ekaros•

Very low royalty fees?

1
00vapour•

I love the music

2
NGEternaL•

I thought it said flat grass at first...

1