brent1123•

You have a few options:

  • Stock has FL-A5 and Rockomax Brand Adapter 02. With perhaps a decoupler underneath they could be used as heat-shield type parts. With Tweakscale you can also make them any size you want

  • Deadly Reentry adds heatshields parts alongside the dangers of reentry heat. The heat-shields have built-in decouplers for separation after use, the unfortunate side of this option is you have to deal with reentry effects, but I'm sure there's something you can do to remove it and have parts only.

  • Procedural Parts add customizable fuel tanks, structural parts, decouplers, heat-shields, and thruster plates, basically all of which you can shape into whatever you want

4
check85OP•

Stock has FL-A5 and Rockomax Brand Adapter 02.

No, they're either not hollow or have structural parts within that wouth collide with anything they're shrouding

Deadly Reentry adds heatshields parts

Only contains heatshields, which I'm using already

Procedural Parts

Again, none of these parts are hollow so that I could shroud a probe/lander/rover

Thanks though.

1
brent1123•

Have you tried using the Procedural Fairings Interstage Adapter? Set the base to be small, the top wide (though the top will point downward), and adjust extra height as needed for heatshield attachment

3
check85OP•

Yes that's how I used to make aeroshells, but I want to know if there's a mod doesn't use procedurally generated parts.

3
titpocalypse•

KW rocketry has non procedural fairings.

3
brent1123•

You could try using the Ubiozor Welding Mod, it's up for 0.25;

Basically, make Interstage Adapter Aeroshells for probes in your most needed sizes, or 1.25m/2.5m/etc., then weld them and restart the game - you'll have those new parts appear in your parts selection then, and as a bonus they'll be one part instead of 7ish.

Or you can use sub-assemblies

1
hab136•
3
swiftraid•

KW rocketry has a few really nice fairings, although they are limited in shape.

3