Overheating processor on new build

Solved

Asus m97ar motherboard
I7 4790k processor Windows 7

I just finished building my computer yesterday and it seemed to be running fine until this morning. It started making louder than normal noises, I checked the temperature and it ranged from 70-85 degrees Celsius while idle. I am fairly sure the fan is seated properly, thermal paste is applied, and bios has been updated. The cpu fan does work.
Help would be appreciated, thanks.

Posted Nov 30, 2014, 10:13 PM UTC

310
BrainicismOP•

turns out, there was some process taking up a huge % of my cpu. I just ended the task, and deleted it from start up, and it fixed everything. Thanks everyone for the the help :)

3
CaptainRene•

No overclock? How did you apply the thermal-paste?

1
BrainicismOP•

No over clock and the paste was pre-approved. I also got some more of it from a friend to put on, but nothing changed

1
CaptainRene•

More thermal-paste =/= less heat

Au contraire mon ami, thermal paste is to be used as a sealant of sort, to prevent gaps between the two metals and if you connect the two metals once and take them apart again, you must clean the contacts and re-apply a fresh seal before reconnecting, which means that thermal-paste is a one-time-use sort of a deal.

If you've done all that correctly and the heatsink is properly connected, you should not be experiencing such high temperatures. I'm upvoting this post for others to give their input, I must sleep now.

1
BrainicismOP•

I really appreciate the help. Shouldn't it have worked fine from the beginning with the pre applied paste? I might try cleaning and reapplying if I have no other options.

1
sloth_on_meth•

sounds stupid but... was it a pre applied paste? did you take off the film to protect it?

1
BrainicismOP•

Yes it was pre applied and yea I took the film off

1
t0astter•

I have read the 4790k idles around 50c on stock heatsink and thermal paste, but 70-85 is way excessive. Perhaps the heatsink isn't mounted evenly?

1
BrainicismOP•

I've readjusted it 3 times already and it seems to be even. Its locked in fine and everything

1
t0astter•

Can you check what voltage is going to it? I wonder if your mobo is feeding it something crazy

1