L35 CPI Vin W, want to put a 4 barrel carburetor on it. Any info?

Posted Mar 27, 2015, 9:26 PM UTC

16
waynep712222•

is yours a CPI with spark plug wires sticking straight up from the cap.. or a real Vortec with a flat top distributor cap with wires that stick out the sides of the cap.. and the plastic timing cover.

what info do you need.. you will need to reduce the fuel pressure by either installing a bypass type fuel pressure regulator.. or a lower pressure fuel pump in the tank.. that is usually easier and cheaper in the long run.. i can supply a fuel pump number that you can install.. you will need the proper intake like this if you have the real vortec motor with the plastic timing cover http://www.summitracing.com/parts/edl-2114/overview/ you may want to find something like the demon carb that has the primary size of a 390 holley and the larger secondary size but its NOT a spread bore carb. . http://www.summitracing.com/parts/sum-m08600vs/overview/ or a smaller carb.. the reason i like these as they have an easily change idle air bleeds and idle transition feeds.

1
RotPitOP•

Yes plugs stick straight up. Metal timing cover. Will that intake work?

1
waynep712222•

probably NOT.. i will search out a different one.. or you can search out a different on on summit.. are you having problems with your CPI. those are sometimes easily fixed..

1
RotPitOP•

I want to open my motor up to different ranges of upgrades. You cant run any more fuel through cpi.

1