r/Audi•
BuiltToSpil1

Fitting my MKV GTI Wheels to my New(to me) B6 A4????

Fitting my MKV GTI Wheels to my New(to me) B6 A4????

Posted Apr 5, 2015, 5:41 AM UTC

311
BuiltToSpil1OPB6 A4Q 1.8T•

So I just sold my 2009 GTI and picked up a 2003 Audi B6 A4(dark blue) with stock wheels and SHITTY(3 diff brands) tires. I sold the GTI with my stock wheels on it. I have a set of VMR 702 18x8.5 et45 that I used to run on the GTI and It was lowered on FK coilovers. It also has Conti DWS tires with ~3k miles on them and I love DWS's for an all season tire. So my question is what the best way of fitting these wheels onto my stock non sport suspension A4. I have read that people who go with 18X8.5 on their B6's go with an et35 for best fitment. So is all I need a set of 10mm spacers on the front and back to make it fit correctly? What about the lug nuts? Also I dont plan on lowering this car as after moving to Chicago as I just cant handle all the jarring bumps, potholes and scraping anymore. How bad will it look not being lowered at all? I feel like it has to look better than stock, which are also curbed to hell btw. Also with funds being tight I wouldnt be able to get the spacers for a month or so. Would they fit on the car without the spacers for the time being?

Let me know guys.

Thanks

1
frickinsweetdudeB7 2.0T JHM 2•

Same offset as the wheels on my car, not running spacers (I could probably safely run 10 on the front and 15 on the back). I'd imagine the b6 and b7 are related for everything wheel gap/suspension related.

1
BuiltToSpil1OPB6 A4Q 1.8T•

So do you have the same offset AND wheel size(18x8.5) or just the same offset? Hopefully both so I can throw these on and know they will fit even if they dont look the greatest on the stock suspension. Do you have any pics of your setup by any chance?

1
frickinsweetdudeB7 2.0T JHM 2•

http://imgur.com/XnPxffD http://imgur.com/UW4xJ6n http://imgur.com/2KBvAJd http://imgur.com/8lXKoIb

I'm on sport suspension with b5 perches in the front (additional .75 inch drop to get rid of reverse rake). There's no poke and it's safe to run at least 10mm up front and 15mm in the back My offset is et43 the difference between et45 is almost negligible unless you're bagged or looking for a really tight fit

1
BuiltToSpil1OPB6 A4Q 1.8T•

Can anyone confirm whether or not I can throw these on my car today as is without spacers? I dont have a jack so I have to pay $20 to get them swapped at a wheel shop near my place, so I would like to know for sure before I drop the coin.

1
zadeluca01 S4 Stage 3•

Or, for that same $20 you can get a shitty floor jack from walmart that will also do the job.

2
zadeluca01 S4 Stage 3•

Why don't you just go try it out using the jack that comes with the car? I realize that jack sucks but it won't take long...

1
BuiltToSpil1OPB6 A4Q 1.8T•

Stock "widowmaker" fllor jack didnt come with car so I know I need to pick one up. That being said.... someone on here has to know whether this will fit or not right??

1
freashlymilc•

To be 100% sure it will fit answer the following questions. What is the bolt pattern of your GTI? The B6 is 5x112. Which one did your GTI use, ball or conical seat lug bolts or nuts? The B6 uses ball seats and as long as the GTI used ball seat lugs or nuts (if it had been converted) then wheels will fit. Just use your bolts that came with your B6.

As for best fitment you will have to run spacers to make them flush with the fender. The best ET is 32 on 8.5. Honestly, with non sport suspension it won't look good. Since you are worried about potholes and such I would just swap a sport suspension and call it a day. The 02 B6 sport suspension are the lowest compared to the other years. I would swap an 03 or higher to not worry about speed bumps.

EDIT: According to this website, Clicky your GTI came with 5x100 bolt pattern. In order to run this you will need to buy adapters to bolt it up to 5x112.

1
zadeluca01 S4 Stage 3•

Fantastic, all this talk about offset and we forgot about bolt pattern! My research also tells me they are different so no they aren't gonna work OP.

Edit: Actually I take it back I'm almost 100% sure his GTI was 5x112 as well so no problems there.

1
BuiltToSpil1OPB6 A4Q 1.8T•

I didn't click the linky because I am positive 09 GTIs are 5x112. And when you say it won't look good do you mean it wouldn't even look better than the stock 16s that are beat to hell and missing center caps? Because I can't even imagine wheels looking worse than this on a b6.

1