Brewing a new beer, went to go double check the recipe inside and boiled my grain. What should I expect from this batch?
Extract
- 12 lbs Amber Malt
Grain
- .5 lb Black Malt
- 1 lb Crystal 60L
- .75 lb Chocolate
- 1 lb Munich
- .5 lb Honey Malt
Hops:
- 2 oz Cascade – 60 minute
- 1.5 oz Target - 40 minute
- 2 oz Cascade – 10 minute
- 2 oz Cascade – 1 minute
Yeast
- House English WLP002
Don't worry, I'm HAHB.
Posted Apr 15, 2015, 3:45 AM UTC
111
I'd expect some tannin character and probably a lot of either unfermentable sugars or unextracted sugars and reduced efficiency.
Only one way to find out!
I agree. But these were all non-diastatic steeping grains, so extract efficiency won't be adversely impacted compared to steeping at 155°F (maybe helped), right?
The Munich and the honey malts will be primary sources of issues I think mashing that high. Really though they are a smaller portion of the mash here so I don't think efficiency is the worry here as much as off-flavors.
I missed the Munich Malt (trying to read on a 2" square screen). Munich Malt is self-diastatic. I didn't realize honey malt was diastatic or self-diastatic.
So you're correct that OP will miss out on about 0.005 of SG in the 5-gallon batch, maybe more.
I just got my OG of 1.110; my goal was 1.109, so I'm pretty happy with the gravity. When trying the wort, it was quite bitter and had a super grainy/powdery feel to it. Should I be concerned?
The bitterness/grittiness is going to be the tannin character that folks are describing. I'd probably still ferment it and see what comes out, but that's me. :)