r/DIYBeauty•
AbsMiDe

My First Serum, I'm nervous!

recipe

So I'm about to checkout with a full cart at Lotion Crafter, but I thought I would just make sure I'm not totally off base with my recipe. Here it is:

37% Aloe Juice 30% Sea Kelp Bioferment 10% MAP (powder) 5% Ceramide Complex (liquid) 5% Niacinamide (powder) 5% Greent Tea extract (liquid) 5% Licorice extract (liquid) 2.5% NAG (powder) 0.5% Optiphen

Does anything look off here? Any suggestions for changes? I'm going for a slightly viscous serum with a 6ish pH. My plan was to mix the liquids together 1st then add in the dry ingredients (like cookies, lol)... Will that work with what I have? Last question, when measuring them out, will it work to use only volume measurements for both liquid and dry (i.e 1/4 tsp) vs using the weights in grams? Thanks you guys!

Posted Jul 18, 2015, 6:46 PM UTC

513
valentinedouxmoderator•

10% MAP can be super sticky. Reduce to 5% or 6%. Please keep in mind that 6% MAP is equivalent to about 20% ascorbic acid.

Always dissolve all dry ingredients separately in different containers. If you mixed MAP and niacinamide together, they will clump together and form shards.

Aloe vera juice and sea kelp bioferment together will leave a residue/tight film on the skin and may ball up after applying moisturizer or sunscreen. Add an aqueous emollient of your choice like (+/-)10% propanediol, dipropylene glycol or butylene glycol to reduce filminess.

Weight measurement is more accurate than volume measurement.

For instance, you want to make basic lotion bars. The recipe asks for equal parts of beeswax, butter and oil.

Volume measurement: 1/3 cup of 2 fluid ounces each. Easy as pie, right? Let's see how much they weigh on the scale.

Weight:

2oz beeswax = 1/2 ounce

2oz butter = 1 ounce

2oz oil = 3 ounces

Please use the digital scale. :)

3
AbsMiDeOP•

THIS is exactly the info I was looking for. I was worried that the texture would be off. I will add the emollient and drop the MAP %, do you have a preference amongst those emollients mentioned? Also, I will make sure to dissolve each powder with some of the aloe juice, but do I need to heat each in order to dissolve? You are awesome! Thanks!

2
valentinedouxmoderator•

I am a big fan of Nature Silk aka 1,3-propanediol.

Niacinamide and NAG easily dissolve in the room temperature and cold water. MAP is slightly difficult to dissolve in the room temp water. It is best to dissolve at 90F/32C.

2
nadapotata•

Hi! Not OP, but I have a question- When you say dissolve the dry ingredients separately, do you mean (for example) dissolve MAP in a portion of the aloe vera, and the niacinamide in a separate portion of the aloe vera, then mix it all together?

1
valentinedouxmoderator•

Yes. :)

2
Hausofchrist•

I've read (can't remember where) that you need a chelating agent whenever you use green tea extract, as it's quite unstable. Here's a link where Kassy explains what can happen when using green tea and acids together. Now obviously this is just trivial information, but I've also read this elsewhere and Kassy's got a lot of experience.

2
AbsMiDeOP•

Hmmm... I will look into that. Thanks!

1
-wyleecoyote•

I can't say anything about the recipe cause I am not familiar all of the ingredients, but I can tell you a bit about the process.

Weight measurements are really the only way to guarantee your percentages will turn out right. Sure, you could go by volume but you wouldn't be able to tell exactly how much of what you put in and that makes it hard to recreate.

Since you are including things like aloe you need to heat and hold your ingredients to:

  1. Ensure you kill nasty bacteria
  2. Ensure everything will mix properly.

Powders can usually be added to the mixture that you are heating. It helps them dissolve completely and uniformly. Although you should really check to see if anything needs to be added after the product cools. Heat doesn't work well with every ingredient. Lotion crafter usually says whether the product should be heated with oil, water or added after heating. If it doesn't say, you can just do a quick google search to find out.

Good luck with your serum!

1
AbsMiDeOP•

Thanks for taking the time to answer. It makes sense that heating would ensure better dissolution, I didn't realize that aloe would need that for sterilization purposes, though. Guess I need to add a thermometer to my cart!

1
giraffesyeah•

You can get a candy thermometer for cheap.

1
eggboys•

I'm new to DIY skincare. I can't answer your question but I'm very curious why you want a pH of 6. Is there an ingredient in your recipe that works best at 6?

1
AbsMiDeOP•

It's mainly for the Niacinamide, it needs around 6-7 pH to work optimally as I understand it. Niacinamide does bad things if the solution gets too acidic.

2
eggboys•

Thank you!

1