Source
r/ecr_eu•
kingpool

Need little advice about cold vape

Question

Hello all,

I finally discovered what type of vape I like most and it's weird one.

I really love cold vape with lot of airflow and still good taste.

My problem is that I have to use low wattage and lot of airflow or it gets too hot for me. Sadly it tends to mute taste.

I countered it with more PG in my juices and now it works how I like but I think I'm missing something out without using high VG juices.

What options do I have for high VG juice and cold vape?

Posted Jul 26, 2015, 7:45 PM UTC

523
sjuggeSX Mini+Cthulhu / SnowWolf 200w+Velocity / stuff•

A longer drip tip will allow the vaper to cool down. It doesn't have to be massively long, a bit of extra length can go a long way.

3
kingpoolOP•

Thanks,

Something like this should be enough?

https://www.fasttech.com/products/1/10013557/2291305-acrylic-stainless-steel-muffler-hybrid-510-drip

1
sjuggeSX Mini+Cthulhu / SnowWolf 200w+Velocity / stuff•

Seems like a length that could already make a difference. I have the impression that glass also cools down the vape a bit, but they have the downside that they're lip gunk magnets. I rock one of these sometimes and find it quite enjoyable.

Edit: seeing the price on the drip tip I linked again made me order a 5-pack...

1
kingpoolOP•

Then I need to get more then one.

Thanks a lot. I will try out something asap, I currently use short drip-tip. That may be reason.

1
PartTimeLegend•

I love a cool vape. I would rather not burn my throat with 200W. This is why I went for temperature control.

3
kingpoolOP•

I have two mods with TC. I think I have to plug in my nickel coil and try it out. Thanks. I actually thought that because it's so low ohm I get hot vape. How silly of me, its temperature it controls, I just go all the way down :).

2
AuxxЯussian occupant•

TC and 200W are totally unrelated to warmth of the vape.

2
PartTimeLegend•

Well yes and no.

Assuming a perfect 1 atm we see air density of 1.3 kg/m^3. 1 watt is 1 J/sec. So the heat of air is 716 J/kg K.

I know we are talking about liquid, and I only know water is 4.187 kJ/kgK. I've never measured eliquid and I would assume the blend would vary this.

Temperature control simply uses the power and variable resistance to regulate the air temp.

r/theydidthemath

1
AuxxЯussian occupant•

There are more variables. Atomizer construction, airflow, build, etc. I once had a build which required around 250W, it didn't produce much vapour or heat at 100W. I know a guy who's into extremes, he builds for 300-400W. Such builds are very cool at 200W.

1
goldfish_of_chaos•

You will only get more cloud with higher vg. I think you will be better off trying high resistance coils with a single coil rta or rda.

2
kingpoolOP•

Thanks, I'm not really interested about clouds, but there are so many nice juices with high vg content.

1
hapticsquideGo One | Invader Mini & Velocity, Troll, Cthulhu•

Temperature control and a single coil RDA. I'm getting great results from single coil Ni200 in the Hastur, plenty of air, loads of flavour and a nice cool vape.

2
kingpoolOP•

Thanks and Hastur is not even that expensive. I will add it to my list of future purchases.

2
vapourdepot•

Getting some nickel tomorrow, will be testing this out :)

If only there was a TC SMPL.

1
hapticsquideGo One | Invader Mini & Velocity, Troll, Cthulhu•

0.15ohm, 9 wraps of 0.3mm tempered Ni200, ID 3mm is working well for me on the Hastur. Been ages since I built an RDA single coil and was surprised how well the Hastur vapes like that. With nickel & TC it's my favourite flavour dripper right now.

1
trstnI run SpiritusVapes.com (Free shipping code: "ecr_eu")•

I've got a bds90 on a mech pipe I've got and that gives a lovely cool vape.

Haven't seen them made for a while but I'm sure you could find something similar, you'll soon see why it's best on a pipe, 90mm! ;) http://captivape.com/bds90/

2
kingpoolOP•

I'm not advanced enough for mech pipe yet :). I will take look, just because I have ignored mech pipes for 3 years now and those actually do look cool.

1
trstnI run SpiritusVapes.com (Free shipping code: "ecr_eu")•

Well that's just the drip tip, it's 510 so it'll fit most atomisers, but it definitely looks more at home on a pipe

Limelight Mechanics make some lovely longer tips as well... http://limelightmechanics.com/product-category/stems/

3
SmooDiver87•

You could try ordering some koolada and DIY yourself some liquids. You could even add some to pre made juices. It doesn't really have a flavour but it gives a cooling sensation that's pretty awesome with fruits and mints alike. Try it at low percentages first as it gets very cold with RDAs at anything more than 1%

2
Daztastic•

You could also try a drip tip with air-flow control.

1
kingpoolOP•

could you link example of one? I have seen one atty with "upper" airflow but I think it was not part of drip tip.

1
Daztastic•

http://www.vapeandecigstore.co.uk/DripTips/pid22554/cid1212/2PuffsAirFlowControlDripTips11Colours.asp

There ya go. I've tried these and when I used my other rdas (I only use my velocities now) they were all I used.

3
kingpoolOP•

Thanks

1