r/Ford•
PhilKnight

Issue with my 2013 F150 Ecoboost

So I bought a 2013 Lariat Ecoboost back in May. I took it in for an oil change today at the local ford dealership and noticed that the blow off valve was not making any noise at all after the oil change. When I called them back, they told me that that engine didn't have a BOV so it shouldn't have been making the noise in the first place.

Anybody know why the BOV would no longer make any noise at all? It was pretty loud before.

Thanks for any advice in advance.

Posted Aug 1, 2015, 12:46 AM UTC

26
L_C99Ford Certified Tech•

A stock f-150 does not have a BOV, its has a BPV which essentally does the same thing but recirculates the blow off instead of venting to atmosphere which does not make any noise, what exactly does the noise sound like. Is it running any different. If it is not lacking power that I doubt that there is an issue. Pretty hard to affect anything like that while doing an oil change.

3
PhilKnightOP•

So is there a chance that the previous owner had put an after market BOV? It sounded like this: http://youtu.be/--9kzR1IrKw before I took it in, which I should add that the oil change took an hour and a half, and it makes no such noise after at all.

Sorry I know very little about this kind of stuff.

1
L_C99Ford Certified Tech•

Ya that's not stock. If the dealer was busy hour and a half does not sound super unreasonable. Figure it takes 15 min just for a tech to start working on it. Oil change, tire rotate, and inspection on a ecoboost takes 45min-1 hr (they are the worst for oil changes) and then they still have to do the paper work and get you out the door. I cant help you out with what could have happened but I find it hard to imagine they could mess up a BOV on an oil change.

1
WTFbeast15 Magnetic 5.0 - 14 Edge •

I'm not familiar with the BPV on the F150, but maybe the hose connecting to the valve was off, causing to dump to atmosphere, and they simply reattached?

2
rkalla•

Few others that have mentioned it are right - if you were hearing that obvious blow-off sound, that is an aftermarket BOV -- the Ecoboost's ship an internal circulating one as L_C99 mentioned -- it's one of the reasons an oil catch can is a good idea if you plan on really pounding on your EB.

The problem with them screwing up the BOV is it can cause a lot of backpressure on the turbo - which is generally not a good thing and I imagine would stress/rupture the charge hoses leading to the turbo over time.

Fortunately the BOV is relatively easily accessible via the wheel well (I believe it's the right one) - check this guide - http://www.stage3motorsports.com/Turbosmart-Blow-Off-Valves-Install-2011-F150-EcoBoost-Project-Truck.html

it should point out exactly where you need to look and what you might want to check... for example, if a hose is not attached right.

If the BOV is one of the TurboSmart units (which many are since they are the most popular) you can actually adjust the intensity of the external blow-off VS internal blow-off by simply twisting the head of it (increases spring pressure which causes more internal blow off like a stock EB valve or decreases spring pressure which makes it easier for the trap to open and exhaust into atmosphere and make that sound)

Scroll down to 'adjusting your valve' here to understand how IF you have a Turbosmart in your car - https://system.netsuite.com/core/media/media.nl?id=285708&c=830533&h=1d600932188326898037&_xt=.pdf&ck=RAMC-xcDAj07UaQB&vid=RAMC-xcDAkE7UZWJ&cktime=131863&cart=77276&addrcountry=AU&gc=clear

It is possible that when they were rotating tires either a knowledgeable tech or troll-tech got in there and tightened the valve all the way up so it exhausts back into the intake just like a stock BOV does and nothing is wrong, you just lost the cool sound.

1
robryownz14 GT, 15 FoSE 1.0•

It's possible they re-flashed the ECU. The BPV's on the F150 (And other ecoboosts) are electronically controlled. That would explain it maybe.

0