[Request] A light bulb blows up in front of you, and you blink just in time. How close can you be to a blowing-up light bulb for your reflexes to get your eyes shut before they get hit with shards of glass?
Posted Aug 2, 2015, 1:42 AM UTC
84
Posted Aug 2, 2015, 1:42 AM UTC
[deleted]
[deleted]
[deleted]
Let's say a person's eye is d distance away from the surface of the light bulb. It will take t_b time for a piece of the bulb to reach the eye, and t_r time for the person to react. A person's eye is safe if they react faster than the piece of bulb reaching their eye. This relationship is defined by the formula:
t_r < t_b
The relationship of distance, speed, and time is given as d = s * t which means the formula above expands to the following:
t_r < d / s_b
Where s_b is defined as the speed of the piece of bulb travelling towards a person's eye. Since the question asks for the distance, we rearrange the formula to solve for d as follows:
d > t_r * s_b
So we need to calculate the reaction time t_r and the speed of the bulb projectile s_b.
The reaction time consists of two parts: the time it takes for the light from the explosion to reach the eye t_L, and the time it takes to close the eye, t_e. We assume a person can react instantaneously as soon as they see the light bulb start exploding.
The time for light to reach the eye is t_L = d / s_L (using the distance-speed-time relationship), where d is our distance and s_L is the speed of light, defined as 299,792,458 m/s.
The average time to blink is 300 to 400 ms (source: here and here), so let's average it: 350 ms. Since a blink consists of closing and opening your eye, we halve that to 175 ms, which is our t_e.
So now our formula is expanded to:
d > (d / s_L + t_e) * s_b
Using some algebra we rearrange this formula to get:
d > t_e / (1 / s_b - 1 / s_L)
To calculate the speed of the bulb s_b is harder because it's not well-defined and depends on too many factors. I found a video of a bulb exploding in slow motion and did calculations on this. This is the only video I found in my (albeit brief) search of a slo-mo video of an exploding light bulb where it exploded from within; in all other videos I found, there was an external projectile introduced. I assume you wanted a calculation based on the former, so that's how I'll proceed.
I picked the projectile which I noticed going the fastest, as I assume this is the worst-case scenario. It took 14 frames for this piece of glass to reach the edge of the field-of-view. Since this video was shot at 2500 fps, that means the shrapnel travelled the distance in 14 / 2500 = 0.0056 seconds, or 5.6 ms.
This is a standard G-type bulb, and it appears to be a G19, used commonly in vanities. According to this site its diameter is 2 3/8 inches, which is 60.325 mm. Using this number, I calculated an estimate of how far the shrapnel travelled, which I estimated to be 159.931 mm. This makes the assumption the shrapnel is travelling at an angle perfectly perpendicular to the camera's view axis, which is probably not valid, but I have nothing else to go on.
Using the last two numbers, I estimate the speed of the shrapnel to be 0.159931 m / 0.0056 s = 28.559 m/s.
So now we plug all our values into the last formula above and we get
d > 4.9978 m
Therefore, the answer to your question is: you have to be at least 4.9978 meters (16.397 feet) away to avoid your eye getting cut up.