How (or where to go) to change a tubular tire?

So I have some sweet old tubulars and the rear finally went flat. I'm trying to figure out how to change it, but neither of the two tutorials I read explain how/when to apply the glue. So I figure to ask the experts. Do you have any online resources that you think clearly explain how to safely change a tubular tire? Do you have a place you would recommend for a professional install? Also, is it possible to patch a tubular tire?

Posted Aug 27, 2015, 12:08 AM UTC

99
12XUXU•

RiverCity does a very good job with tubulars, but it ain't cheap, I'm guessing $50 or $60 for just the glue job, and thats on a pre-cleaned rim. If the tubular is flat, but the glue job is still good and the tire has life, you might as well try some Stan's or Cafe Latex in the tire. Is this a cyclocross tire or road?

VeloCult May do tubulars, but I think of them as more of a high end commuter/touring shop than a race shop and I doubt they glue tubulars very often. Other race shops in town that probably glue include PBS (definitely glue), Sellwood Cycle, Sugar Wheelworks, and Cyclepath.

2
MakerzMarkOP•

The glue is good, the tire is probably a bit worn, but not beyond service IMO; it flats out gradually going from full pressure to flat overnight, so I guess it's a small hole. I'll give the cafe latex a try! I've never heard of it before.

The tire is for an early 90s track bike; Campy Omega 6082 wheelset. I'm nursing an injury and don't plan to take it to the dairy any time soon; I just want to be able to practice getting comfortable on a fixed gear and ride around the neighborhood.

Sugar or Cyclepath would be my go-to for a pro glue job, but I really would like to learn to do it myself.

1
blankityblank_00•

A store like velocult on Sandy will definitely change your tire and you can drink a beer while you wait. Patching a tubular tire is an ordeal but you can typically plug it or just shoot glue into the inside that will fill the hole.

1
12XUXU•

One more point, none of these shops are going to teach you to glue. It's a process that is a massive pain in the ass, takes a lot of time, mechanics hate it, and it opens the shop up to liability. Personally, gluing tubulars and suspension work are the things I've decided its just not worth doing myself. I've glued Many tubulars in the past, road is somewhat easy, cross is a nightmare, both are unpleasant and time consuming to say the least.

1
MakerzMarkOP•

So what do you use to strip the old glue? And do you have a brand preference for new glue?

1
12XUXU•

So, its complicated. Best glue remover I've found is "Goof-off" a product available at hardware stores for removing paint, crayon, etc. If possible, you want to soak the wheel bed and then rub it off using a rag.

Mechanical means, some people take a butter knife or a tire lever and push the glue off. You can also attach a wire wheel to an electric drill and buzz the glue off ,this is probably the best method, but go easy if the rims are carbon as you can grind through them with enough force.

All of these methods are time consuming and messy, just a heads up.

1
xjthree•

You could try sugar wheel works on Vancouver. All they do is wheels and they might even show you what to do. Judd is super nice.

1
MakerzMarkOP•

Thanks!

1
xjthree•

That should be *Jude

1