TCAM on Cisco SG500

Hello, I'm trying to find a solid value on the amount of TCAM address space available on Cisco's Small Business SG500 models. I know the value is 512 on the SG300 series as we have one of these and are running into some problems with TCAM, I was wondering if anyone happened to have one of these and could find out what the value is, preferably with a screenshot.

As far as I can see it is not a value that is published by Cisco.

Posted Sep 2, 2015, 10:12 AM UTC

17
senditCCNP Voice CCNP CCDA•
2
BottswanaOP•

You know, I spent ages searching and only came up with rough estimates on what the values were, I can't believe I missed that. Thanks, I appreciate it!

1
senditCCNP Voice CCNP CCDA•

No problem.

1
VA_Network_NerdInfrastructure Architect & Cisco Bigot•

Complex ACL issues or something ?

What do you need "large" TCAM for ?

1
BottswanaOP•

Not per se. The current SG model we have is being used for a limited amount of Layer 3 switching, so the tcam entries are being used for ARP/IP4 hosts. The problem is, the number of entries is larger than the amount of available tcam space on the switch. Which implies to me that the switch needs to be replaced with something more powerful for the task it is performing.

Unfortunately some people need more convincing, and has demanded evidence that the amount of TCAM resource is higher in the larger models. Politics.

1
the-packet-throwerI took the last ARIN IPv4 assignment•

Well they aren't very good switches (nor are they intended to be) so I wouldn't suspect it supports much larger than 500ish. If you have more things you shouldn't be using that class of switch.

1
BottswanaOP•

They are better than the Netgear switches we are using currently! Baby steps.

1