Skyfall RDTA Review

I purchased this completely on a whim when seeing it on Vapordna. I couldn't find any reviews so I'm getting one out there.

More than anything, the performance is great. I built mine with 13 wraps of twisted 316L. I had dual coils but I broke one so I just put it in single coil mode. I also tried a single 316L clapton between the posts and the chuff style cap, but I had to set it to at least 120W and then it was like hitting a bong. The airflow is ridiculous, even with just the "510" connection cap.

Machining quality is good, but it smelled like a pile of machine oil, somewhat to be expected. All the threading is smooth, no burs or anything that catches on the one I got. No missing peices, and I think duplicates of all small parts, which is key when you cannot buy them anywhere.

Everything assembles as you would expect except one small part of this damnwonderful thing. On all my atomizers, I always tighten everything to a moderately tight point, but where I can still get it loose again. With the squonk connection between the tank and RDA base you MUST loosen it just a cm or two in order for it to make a power connection. If you loosen it too much, your posts will start twisting and you can easily get shorts or blow your coil. Not enough, it just doesn't work. A fair amount of time was spent swearing at this thing as I figured out the sweet spot where it will still squonk but also still work. Just do that first and your life will be easier.

510:

http://imgur.com/mwmNcjk

Squonk Pin:

http://imgur.com/ZHGi3Fh

The experience of opening and then building this was a huge lesson in patience. I've been vaping since 2009 and this took me 5 hours to get working from opening the mail to vaping, then I still changed my mind and built the twisted dual coils as 120+W is silly imo. A lot of it was probably because it was my first squonker, but oh my hell, I almost just gave up at points.

The 510 Drip Tip connection uses vertical airflow and a entended chimney that acts as a sort of splash guard, which I quite like. The only thing is if you over squonk, then the extended chimney will be sitting in a pile of juice. When you go to hit it, it acts like a straw. Do not recommend. The connection cap has three indents to allow you to use the vertical airflow in both single and dual coil.

Cap:

http://imgur.com/SUXyuKp

Overall, this thing has replaced my MutationX v3 as my main RDA. The squonk is just fucking amazing. You do need a needle tip juice bottle to fill the tank, which is done through the squonk/power connection. Anyone who isn't afraid to take on an atomizer with a lot of troubleshooting points, I heartily recommend this Atomizer. The newer to vaping folks, wait for a generation or two of these RDTA and things should get a lot easier to work with. That said, once it's working, zero issues.

http://imgur.com/BDNJwYb

Posted Sep 27, 2015, 5:32 PM UTC

915
Loading comments…