[University Engineering] 300 tetrapak(milk cartons) and packing tape raft to support 330kg team of four.
Sorry in advance for the wall of text. We are supposed to build a raft made out of 300 1L tetrapaks and packing tape only, and while this task alone is rather easy, it turns hard when it is supposed to hold up the full 4 member team for at least 2 minutes. Now this might sound easily accomplished, however our team is the only team that weights over 300 kg (334kg I'm fat I'll admit it), and while it might be a viable option to lose weight, it's not that realistic when you have two midterm weeks to do it. We've tried several configurations, including a hull shape, flat 3 100 stacks, baththub shaped and inversed bathtub and none have worked in scale with the proportional weights and displacements. While we can displace up to 500 kg of water (inferred from small scale testing), the shape neede for this makes it impossible for a human, let alone four, to sit in, as it is a tetrapak and a half wide at the bottom. Quite Frankly the whole team is stumped( we've asked around the higher semester guys and every single one we've asked has said the same thing: Just stack 3 100 layers of tetrapaks. No other team seems to have faced this predicament. I would certainly appreciate any kind of feedback, as any fresh idea right now would probably help out a lot to give us a push towards a workable prototype. Thanks in advance and sorry if my english is bad, as it's not my native language (I'm in Mexico).
Posted Oct 24, 2015, 5:26 AM UTC