High ping (oscillating) to router on desktop
I've spent a few hours trying to figure out why my ping to my router is high on my desktop, but I've been unable to resolve the problem.
I've tested on my phone and laptop via both wi-fi and ethernet and pings are fine. I have a Qualcomm Atheros AR938x Wireless Network Adapter. My network is configured for 5GHz band.
Things I've tested:
- Reinstall and update Network adapter drivers
- winsock and tcp/ip stack reset
- flush dns
- restart everything (router, network adapter, computer, ...)
- Factory reset router, update firmware.
...
Reply from 192.168.1.1: bytes=32 time<1ms TTL=64
Reply from 192.168.1.1: bytes=32 time<1ms TTL=64
Reply from 192.168.1.1: bytes=32 time<1ms TTL=64
Reply from 192.168.1.1: bytes=32 time=438ms TTL=64
Reply from 192.168.1.1: bytes=32 time=119ms TTL=64
Reply from 192.168.1.1: bytes=32 time<1ms TTL=64
Reply from 192.168.1.1: bytes=32 time=154ms TTL=64
Reply from 192.168.1.1: bytes=32 time<1ms TTL=64
Reply from 192.168.1.1: bytes=32 time<1ms TTL=64
Reply from 192.168.1.1: bytes=32 time<1ms TTL=64
Reply from 192.168.1.1: bytes=32 time<1ms TTL=64
Reply from 192.168.1.1: bytes=32 time<1ms TTL=64
Reply from 192.168.1.1: bytes=32 time=494ms TTL=64
Reply from 192.168.1.1: bytes=32 time=175ms TTL=64
Reply from 192.168.1.1: bytes=32 time<1ms TTL=64
Reply from 192.168.1.1: bytes=32 time=211ms TTL=64
Reply from 192.168.1.1: bytes=32 time<1ms TTL=64
Reply from 192.168.1.1: bytes=32 time<1ms TTL=64
Reply from 192.168.1.1: bytes=32 time<1ms TTL=64
Reply from 192.168.1.1: bytes=32 time<1ms TTL=64
Reply from 192.168.1.1: bytes=32 time<1ms TTL=64
Reply from 192.168.1.1: bytes=32 time<1ms TTL=64
Ping statistics for 192.168.1.1: Packets: Sent = 671, Received = 671, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 509ms, Average = 91ms
I think I need to replace the adapter, but I'm not sure. Thanks for your help.
Posted Oct 28, 2015, 10:43 PM UTC
Could be noise. Are you on a crowded channel?
Doesn't seem to be the case. There's minimal interference according to my router's system scan. I tried to manually set the channel to be sure and the problem persists.
I've heard there might be some issues with my adapter (WDN4800) and windows 10 (which I just upgraded to), but I'm not sure how to verify/resolve it.