My opinion on flying the Hawker Hunter
I do not have the Hunter F1 so feel free to leave. Everything else is stuff I (sort of) remembered from BMS, DCS and getting my ass handed to me in Falcon Online.
Looking at the data sheet provided by SubRyan, the constant TAS climb which turns out to be 0.86 mach. This looks more like a modern day jet than it does a Korean War era one, which for reference only needs to fly up to 0.55ish mach.
A military power (no AB), you would think F-16s will simply zoom away right? Well no, they're actually quite happy to sit at 35 units of AOA while climbing at godawful speeds and never accelerate. Now I think the main cause of this is high AoA which is producing maximum lift which consequently creates relatively large amount of induced drag. Compounding this is the gap between static and ram compression effects at high speeds, anything between means you get less thrust until you stop or go very fast (0.8+ mach). However I could be completely wrong here, as I've only stitched this from reading so feel free to tell me it's bullshit.
Then comes turning in a jet during combat. There are two values, instantaneous turn rate, which ends up as the slowest speed where you can achieve the highest G and smallest turn radius. And the best sustained turn rate, the point where you have the highest turn rate without losing speed or altitude (also smallest radius because you can sit at 7Gs at afterburner once you exceed 1.2 mach, not very useful in a close in dogfight). Instantaneous is something everyone has done, whether you are familiar with BFM or not. You just flick the mouse really hard in one direction, build up 100G and your nose will turn into your asshole.
The sustained turn rate is quite important. Simply put it's the slowest you should be. Remember how a plane can climb at piss poor speeds and never accelerate? Well the same thing happens here, except now you're not climbing because that energy is going into turn rate. In the end you'll need to commit more of that piss poor speed to pull a harder turn to avoid another shot, which further reduces your turn rate again. This was what too me longest to understand and use in BMS, often I would just pull harder without ever relaxing the stick until I dropped below sustained and end up in the rut which I described above and ending up being in a worse position than if I simply relax the G and maintained best sustained. I'm pretty sure had I been flying anything without an AoA limiter like a Mig-21, it would happily depart flight.
Now I'm not saying you should never turn hard, because in the end once you kill the guy, problem solved. What I am saying is that be aware of speed control and the implications, especially when flying the Hunter or any other modern era jet. There is no afterburner after your amazing barrel roll overshoot, so it's up to you to decide whether or not it's worth using the last of your speed in a zoom climb to get the guy, or relax and bunt over to extend for speed so you can stay in the fight.
tl;dr: It's a modern fighter jet, speed control is important.
hurr;durr: Sonic Boom and Zoom plane.
Posted Nov 10, 2015, 3:42 AM UTC