[HELP] Theoretical Custom MF68/VA68M + IBM EMR wiring and all that business
So I had in mind a layout where there were no more than 5 rows, but I could have many columns but the main 60 percent of the board can't be too far away from the mouse. I like the IBM EMR because of it having function keys at the left side of the 60%. I like the Magicforce 68 and the Varmilo VA68M for the minimal navigation cluster. So now I have this layout (theoretical!). I decided draw out some funky wiring (Also theoretical!) where the columns are connected with the ones adjacent in pairs, and so we have a 10 by 9 wiring matrix. The standard wiring yields a 5 by 18 matrix, well within the specs of a teensy(if I can read specs correctly), but I thought it would be interesting to discuss.
As they say pictures tell a thousand words,
So please enjoy my piss poor mockup of wires
Also about the diodes, I imagine that the diodes should be connected through the columns in the funky layout. Since it would be easier to connect columns of adjacent switches instead of jumping a switch going horizontally. The lead that the diode connects into shouldn't matter so long as the diode allows current to go away from the switch, correct?
Posted Feb 7, 2016, 10:15 PM UTC
i like it .. really like it!
I'm not sure about your matrix layout tho .. but at a quick glance it looks like ti could work. having a 9x10 matrix means you could use an arduino pro micro (20 gpio) and save .. 15$
if you plan to cut a plate for that i could buy a couple :)
My drawing skills are not up to the task, hopefully the description could compensate. Where is this pro micro with 20 i/o's? I can find one with 18 on sparkfun.
The plate is one of the hurdles I think. Big Blue Saw is quoting me at 100~ dollars per plate and 50~ if I order 5, and that is just the top plate. I intended to get a bottom and acrylic from them too, but the quote for singles put me at around 250~ for just that.
The other hurdle is get enough capital to buy even a single set of parts. Still saving the money.
yeah i confused the micro with the pro micro. one has 20 and the other 18