[Troubleshooting] My build isn't powering up

###Troubleshooting Help:

RESOLVED

PCPartPicker part list / Price breakdown by merchant

TypeItemPrice
CPUIntel Core i5-4460 3.2GHz Quad-Core ProcessorPurchased For $181.83
MotherboardMSI H81M-E34 Micro ATX LGA1150 MotherboardPurchased For $56.99
MemoryMushkin ECO2 8GB (2 x 4GB) DDR3-1600 MemoryPurchased For $43.98
StoragePNY CS1111 120GB 2.5" Solid State DrivePurchased For $44.99
StorageSeagate Barracuda 1TB 3.5" 7200RPM Internal Hard DrivePurchased For $54.84
Video CardPowerColor Radeon R9 380X 4GB PCS+ Myst. Edition Video CardPurchased For $223.98
CaseCorsair Air 240 MicroATX Mid Tower CasePurchased For $89.99
Power SupplySeaSonic S12II 520W 80+ Bronze Certified ATX Power SupplyPurchased For $58.98
Operating SystemMicrosoft Windows 8.1 OEM (64-bit)$0.00
Wireless Network AdapterTP-Link TL-WDN4800 802.11a/b/g/n PCI-Express x1 Wi-Fi AdapterPurchased For $36.95
MonitorAOC i2267Fw 60Hz 22.0" MonitorPurchased For $99.99
Prices include shipping, taxes, rebates, and discounts
Total$892.52
Generated by PCPartPicker 2016-02-25 14:32 EST-0500

Describe your problem. List any error messages and symptoms. Be descriptive.

I think this might have to do with the fact that my Peripheral 4p cable from my PSU isn't connected. I'm not sure where to put it. Everything else is, to the best of my knowledge, fully connected.

List anything you've done in attempt to diagnose or fix the problem.

I did these things and it still won't power up.

Post relevant photos of build/parts here.

This will be in the comments.

Posted Feb 25, 2016, 7:36 PM UTC · edited

110
hockeychick44•

The peripheral cable doesn't matter. Does your power supply fan spin?

1
scriptkittenOP•

No, absolutely nothing happens when I press the power button.

1
iznotros•

PSU switch set to on? Make sure the PSU is plugged directly into the wall if possible?

2
scriptkittenOP•

PSU switch set to the I, as the manual says, and plugged directly into the wall.

1
hockeychick44•

Ok. Get a flathead screwdriver and short the two power connectors for your motherboard to your case. Touch both pins at the same time, the ones highlighted red:
http://imgur.com/nMKyMF7

What happens?

1
scriptkittenOP•

Ummm. Is that a good idea?

1
hockeychick44•

Yes, I promise it is perfectly safe. It is a very common method to "hotwire" your computer. If this works, we have narrowed it down to a case problem. If it doesn't, we can rule out the case.

1
scriptkittenOP•
1