r/guns•
miscsubs

Lubricating machine gun links

I have a thousand machine gun links and I need to store them for a while. They look like this.

Can I or should I mix WD-40 or any kind of lubricant in the bag before sealing the bag? Although the links are not a part of the gun, they still enter the chamber (I think!) so I feel like I probably shouldn't. But I'm not even sure if these need lubrication or not.

Thanks!

Posted Mar 5, 2016, 4:09 PM UTC

110
Dontellmywife•

No, they don't enter the chamber at all. If you are storing them, then preserving agent would be a good thing as they will rust without it. But when used, they should by dry to prevent them from picking up as much dirt while feeding into the gun.

Any oil based product designed to protect against corrosion will work, or you can use anti-rust products like the Golden Rod or Zerust tablets.

8
Iggins01•

Or cosmoline

8
miscsubsOP•

Thank you!

2
wee0x1b2 | 7-28 #2 ROCKSTAR•

WD-40 is not a lubricant.

They don't enter the chamber.

They don't need lube.

6
couldntorwouldnt•

Super light weight motor oil. Let it dry/run out in the sun, then wipe it off with a clean rag before you run it through the weapon.

2
Katapesh_Express•

I'd put them in an ammo can, add a pint of light oil ($4 motor oil would be fine) and call it good.

2
Turkeyoak•

Why not Rem-Oil instead of WD-40? RO is a lube and you can spray lightly.

1
nlevine1988•

REM oil is why my mosin bolt got rust. REM oil sucks.

1
Turkeyoak•

I didnt know the Freedom Group screwed up RemOil too.

Mine works fine but I just switched to Safariland CLP recently.

1
nlevine1988•

I mean it's better than nothing but I much prefer CLP. REM oil is just to thin for my liking.

1