Another Inclination change question

Space Flight [P]

So, I am setting up my usual early career RT, 4 sat network. I'm using a single launch vehicle, with multiple deployments. The thing is, using resonant orbits, that means I have to do 6 major orbital manuevers, not to mention the many minor adjustments. So doing them all manually, I get small inclination changes between sat deployments (usually < .500°)...

I can get them down under .010 most of the time, however, the issue is knowing which direction to burn.

Being as how I dont use maneauver nodes, and there is no target set, I do not get indicators of, and have no idea where the An/Dn are... So not only do I have to (very badly), eyeball and guess where to burn, I have no idea whether I have to burn normal or anti-normal... Have the time I guess wrong, and end up increasing the inclination, then quickly have to flip, and burn the other way... and of course, doing the flip ends up throwing off my orbital period by up to .1~ 1 second (critical, since I need to get the sats to within .1 sec of their period)

So, I assume if I can get the first sat's inclination where I want it, does that mean I have to set it as target, for all the rest, so I get An/Dn indicators to appear?

Also, even doing that, wont help me get the first sat into a near-zero inclination, without guessing where the An/Dn nodes are, OR which direction to burn... ???

Posted Mar 15, 2016, 4:19 PM UTC · edited

111
schnipp•

A good way to get a zero inclination is to set Mun as the target. Since it has zero inclination, you can just line up your orbital plane with it.

3
Stone_BlueOP•

Thanx for the suggestion :)

However, I'm dealing with less than ~1° changes, so I was hoping for another solution that included more than just "eyeballing"...

But thanx though, I didnt think of using the Mun as a visual aid... ;)

1
RoboRay•

That's assuming that equatorial orbits are desired, which is not always the case.

Here's an example of two sets of sats in crossing 45 degree inclination orbits, staggered so that when one sat is crossing the equator, the adjacent sats in the other plane are up near the poles. This configuration gives global surface coverage, as even the poles of the planet have line of sight to at least two sats at all times.

But yeah, if you do want an equatorial orbit, just target the Mun. :)

1
RoboRay•

I suggest using MechJeb or KER, so that you have access to the precise, detailed orbital information you would have if you were really trying to operate spacecraft.

That way, you can get the first satellite where you want it, then target it from the other sats to get the phasing, periods and plane correct.

Anyway, don't worry about minor plane deviations or even apside heights... even real-world satellites aren't perfectly positioned. Instead, they each have a designated "box" in the sky in which they wander back and forth each orbit.

What really matters is the orbital period. As long as you get that exactly matched, preferably to less than a tenth of a second, the sats will hold their assigned relative position for many years.

1
Stone_BlueOP•

Thanx... Guess I should have mentioned I DO use MJ most of the time... However, I've been trying a minimalist, early career, stock/RT game... So no MJ this time... :)

Plus, this is one of those cases where I also wanted to know how to do it myself, rather than have MJ do it all the time... :)

As it is, I have to have MJ handle all my rendezvous... :(

1
RoboRay•

Using MechJeb to display information that any real-world spacecraft operator would have access to doesn't imply that you're "letting MJ play the game for you." :)

I never play without MJ, but I also don't use the autopilots. The information displays are critical. Treat them as work being done by the Mission Control back room teams.

1
Stone_BlueOP•

Oh, no-no... I'm not one of those people who is adverse to using MJ as autopilot, OR someone who uses it ALL the time... I can DO manually, most of what MJ can do (except of course rendezvous maneauvers...lol)

However, I NEVER use its display screens... I ALWAYS use VOID, and only occasionally use KER or MJ displays if I need something VOID doesnt display... :) Mostly just an aesthetics choice, since I like how the text in VOID displays bigger, and it uses the KSP skins, rather than the see-thru & click-thru Unity skins, which I dont like... Also, VOID displays less fields, most of which cover what I need, without displaying too much excess, like KER...

Right now, what I'm doing is just attempting to put up the cheapest, lowest-tech, first RT network, for an early career, stock game, that I can... So I want a craft, sats, and a method that any KSP beginner can do... I'm just trying to get everything as close to perfect as I can, so I know what can/cant be done by someone new to KSP...

Its proving hard for me to relate, and to do, since I've been playing KSP for so long, and 95% in sandbox, and ALWAYS modded to some degree.. LOL Also, there are still basic holes in my knowledge of the game, as my original post shows... :)

1
Atomiktoaster•

"Remote tech" doesn't really fit with "stock game" and "KSP beginner" IMO... The stock UI has some limitations for stock tasks, much less setting up something precise like resonant orbits. Hopefully 1.2 will address some of that, or else KER/MJ readouts will be even more critical for successful play.

1
RoboRay•

As long as VOID can show your orbital period, relative phase angle and relative inclination to a targeted craft, that should work just as well.

As to displaying less fields, you can make custom windows in MJ that show only what you want. I don't use any of the default MJ windows... just the custom ones I've tailored to show what I need for specific phases of the mission.

0