Automag Edjamercation

Picking up my first automag this weekend. The fun part is, I know essentially nothing about them. Always loved my mechs, and have been messing with cockers for quite a while, so I figured I might as well cover all my bases and get a mag to play with. Found a 68 classic that needs a little love and got it down to $60, going to pick it up this weekend. One, did I do well on the pickup, and two, lets talk automags! Teach me things!

UPDATE: Picked it up Saturday, and it's definitely been in a basement for a while. A bit of surface rust here and there, but it should be fine. Guy I picked it up from is apparently an old school paintball field owner from out of Indiana, and said he had about $1400 into it when he quite playing. JJ ceramic barrel, benchmark frame, double finger trigger, "trigger job" and some valve work done by a "Gator Mike" or something like that. Haven't gotten it torn down, as I have a cocker project I'm running through first, but soon! Ended up with a 68/45 out of hydro and an old aluminum 3k tank, remote line, revvy, and macroline kit for it as well that he had laying around. Excited to crack into it!

Posted Apr 29, 2016, 1:29 PM UTC · edited

419
billz804•

Yep, you did good. Classic Automags generally fetch around $100.

This is a copy-paste of a post that i wrote for another new Mag-user who was interested in upgrades, but it should still help you too:

The Classic mag will give you many years of very reliable service once you've got her set up.

You're almost certainly buying a used marker, so one thing to keep in mind is that some seals may be bad, or on their way out. An Automag parts kit is ~$20, and contains everything you need for most typical repairs.

  • The number one upgrade you should be interested in for your current 'Mag is the Level 10 Superbolt kit. This bolt system will replace the Level 7 bolt which is currently on your 68 classic valve. After being tuned (which means trying orings until one fits correctly), your Level 10 will make sure that your Automag will not chop paintballs in the breech.

  • After that, you'd likely want to replace the stainless steel body with a ULE body. These are made of aluminum (much lighter), have Autococker barrel threads (which are obviously the most common in the industry), they use a vertical feedneck, and they feature a threaded detent, as opposed to wire/plastic nubbins in your barrel. You won't regret this one, either.

  • Finally (and perhaps most simply), if you remove the big stainless screw on the back of the gun, and remove the valve, you will find what is called the "On/Off" inside the underside of the valve. It is a cylindrical little piece with orings around it. Replace the classic On/Off with an RT on/off, and you will enjoy a more snappy trigger pull.

Now, an X-Valve is a complete replacement for the 68 Classic valve that you currently have. The X-valve is an aluminum "RT-Valve", which means that it will be a lot lighter, and it will have reactive properties (think "bouncy") which can be set to push your finger back after every shot, or completely RT in an almost full-auto fashion. X-Valves also come stock with level 10. This is a big and expensive upgrade, and not something I'd look into until you're more versed in the workings of the Mag. There are also other RT-type valves which are exactly the same, but are made of stainless steel, and cost less in the used market.

--

The great thing about an Automag is the nearly EVERY part is customizable -- an idea which has been lost in the modern-day paintball gun. Automags are unique markers which can be built in any way the owner desires. Beyond the upgrades I've already listed, there are other more intricate and beautiful bodies and rails, there are trigger frames like this AGD Intelliframe, as well as plenty of aftermarket choices. There are all kinds of upgrades upon upgrades depending on which parts you are using.

Definitely register over at www.Automags.org. They are a helpful bunch with a wealth of information already posted all over the site!

EDIT: I forgot to add, Automags LOVE oil. Pour a few drops directly into your ASA, or (if using a macroline setup), directly into the fitting on the valve. Remove the hopper and barrel, air up, and dry fire 8-10 times to get the oil cycled through the marker. Besides the occasional O-Ring, this is all the maintenance an Automag will need; you should do this every time you play.

Do some research over on AO, and once you find out what you want, you should be able to find it there in decent-shape used condition, and for a good (but not necessarily 'cheap') price. The one real downside of Automags is that some parts, especially those which are out of production, can cost a pretty penny (when compared to other marker markets). The inverse (and upside, depending on perspective), however, is that Automags and Automag parts retain their value exceptionally well, unlike most other products in the paintball industry. If you search around and find some of the good deals that are to be had, you can't go wrong.

I hope that helps you, BrotherFink!

6
BrotherFinkOPpump it or cock it/KC•

Helps massively! I had done a little bit of research into parts, but haven't become well versed in them yet. The customization is one of the big reason I got into cockers, and now mags. I heard that the classics take different rails and other parts; is that true?

1
M_SlenderBEO Mafia•

Best piece of advice? Get rid of it because Mags can become an addiction! You start off with one... next thing you know, you own 5 of them!

2
BeardsAndBitchTits•

I think the saying is that the great thing about Automags is that by the time you've finally built the exact mag you want, you'll have enough parts to build at least two more.

2
BrotherFinkOPpump it or cock it/KC•

That's exactly what happened with cockers. Shot one, loved it, and now I have four o^_^o

1
BrotherFinkOPpump it or cock it/KC•

guess who isn't used to Reddit text formatting..

1
Plantasaurus•

ALSO: dont run your automag on CO2! you will damage all of the internal o-rings. As an idiot kid, I thought I could run mine on CO2 with a massive expansion chamber. I ended up spending more money on o-rings than paint that year ( this was before cheaper HPA tanks existed)

1
redivulpis•

This is true for RT, ReTro, X-Valves, but not Classic and MiniMag valves. Classic/MM's love CO2, but aren't terribly picky about the gas you use. The important part was mentioned above, to be sure to use AGD o-rings where possible. newer o-rings like the ones used on most air tanks are softer and definitely don't play nice with CO2 (they soak it up and expand or become brittle and break). When in doubt, use AGD seals wherever possible. They're inexpensive and I'm pretty sure you can still get them directly from AGD.

1
BeardsAndBitchTits•

Also, if you're on facebook, check out AGD MAG enthusiasts. There are many knowledgeable people there who love to help out. Ask a tech question and you will get a ton of answers.

The builds you see there are absolute works of art. You can also find just about any part you you would like simply by asking the group.

1
ManualNarwhal•

Once you get it, disassemble the thing as much as you can and take pictures. Don't unscrew the valve yet, but do take out the on/off assembly.

People tend to put non-AGD parts in there (particularly for the sear pin) and so the first thing you'll need to identify are the knock off parts you'll need to replace.

DO NOT BUY KNOCK OFF REBUILD KITS

AGD guns only take AGD kits. AGD kits are the ONLY way you will be sure that you are getting the correct material (polyurethane) and the correct hardness of the o rings. Using the wrong material (like butyl nitrate, which most o rings are) WILL result in malfunctions. In fact, I can tell you exactly what each o ring does if it is the wrong material.

Just spend the 12-15 dollars on an official AGD kit.

3
BeardsAndBitchTits•

Go to youtube and seach for the videos that originally would have came with the gun. Tom Kaye put out some great tech videos that will tell you most of what you need to know. As others have said, AGD is stll in business and will still fix classic automags.

There is no better marker IMO.

2
The_Nez•

Here is your first lecture taught by the supreme genius creator himself.

2
ProMarkerIdentifier•

Super easy to rebuild and maintain. Use hpa (ninja regs are your friend) use an agitating loader.

https://www.youtube.com/watch?v=6eKZJ9YYp4I

1
M_SlenderBEO Mafia•

register at automags.org. Great community there! and if you're on the east coast, come to Tunaball in June!

1
AverageboiNorthern Cal•

If it doesn't shoot after oiling it, I'd suggest only buying the agd rebuild kit. Otherwise, couple drops of oil in the asa, and you're good to go.
Other than the spring, there's really no way to tune them which makes them pretty idiot proof.

High pressure or shp ninja regs only. If you like it enough, it's worth getting a lv10 bolt.

Personally, I like my mag way more than cockers. The lv10 prevents chops altogether.

1
BrotherFinkOPpump it or cock it/KC•

Local field is capped at 10 bps, but I like the RT aspect of the mags. Technically its still semi! If I run a forcefeed hopper, how much of an issue is chopping going to be? I ran into the same concept on my cockers with the JAM bolts, and found that since they're not running eblades, I never seem to have any trouble, minus the occasional shortstroke. Since mags don't have to be actuated by rod I assume that it will shoot whatever I can feed it?

1
Skunkiddy•

https://www.youtube.com/watch?v=r3onUCFZLUw

Get a lvl 10 never chop a ball ever again. Even people that crazy up their guns with ego frames don't wast time drilling there bodies for eyes because the lvl 10 is so solid.

Here is an ego framed classic http://s788.photobucket.com/user/xero28/media/Paintball%20Stuff/0125000701.jpg.html

Good choice dude, have fun.

1
BrotherFinkOPpump it or cock it/KC•

Appreciate all the info, guys! I'm sure it will make much more sense once I pick it up and get it torn down. Aside from the x valve and lv10 bolt, does anyone have any favorite upgrades/mods? I also seem to find more mags with single triggers, while the one I'm picking up has been replaced with a double. Any difference in RT properties? Any preferences?

1
ManualNarwhal•

An x-valve is top of the top of the line. You can get an x-valve with level X for 200, or an emag/rt valve with level x for 140.

Frankly, level X doesn't do that much these days. Paint is different and level X doesn't prevent too many chops.

The most important thing for you to get, aside from the rebuild kit, is a hyperbolic powerfeed plug and an intelliframe. Those two are going to give you the best bang for your buck. The powerfeed plug is like 5 dollars and the intelliframe will be around 70-100.

If you don't get the plug then your balls will most likely get jammed on the plug you have - if it is not already hyperbolic. Also, get your force feed hopper and set it down to the LOWEST setting. Finally, make sure you got some good detents on your barrel. Dual detents is definitely the way to go.

1