X10SRL-F Compatible Cpu Cooler?

I've got an X10SRL-F on the way & a working e5-2675 v3 processor that a good friend gave to me.

I'm having trouble nailing down what CPU cooler will actually fit on the slot.

I have a 4U case that I am planning on placing it in, and I'm a fan of Noctua. Appreciate any help confirming which of the 2011-v3 slot coolers will actually fit this supermicro and if I need to order an adapter from Noctua.

Posted May 11, 2016, 6:37 AM UTC

119
worldlybedouin•

Ok, I've got the exact same mobo as you, but with an E5-2620v3 instead. Also, the Norco 4020 4U chassis. The following two coolers fit BUT I was not able to use the Notctua as it was a few mm too tall for my chassis and it wouldn't close.

  • Supermicro SNK-P0050AP4 (bought this off Amazon and it comes with the Narrow ILM mounting hardware)
  • Noctua U12DXi4 (got this off eBay and it came with the Narrow ILM mounting hardware)

I'm currently using the Supermicro cooler and it works just fine. Temps stay below 55C. I'm planning on swapping out the Supermicro's 92mm fan with a Noctua. It should arrive later today...so it will be a bit of a hybrid solution.

2
notacceptableOP•

Thank you very much for the information. The narrow ILM was what I could not find for certain.

I like your idea! I may steal it heh.

2
worldlybedouin•

Happy to try and help out.

1
notacceptableOP•

I did decide to order it. You saved me a lot of headache heh! I had the U12DXi4 in my cart before posting this.

2
worldlybedouin•

Sorry for the confusion on my part, which of the two did you buy?

1
worldlybedouin•

Also, not to hijack your thread, but will you be upgrading the firmware on the mobo to take advantage of the E5-v4 CPUs which just came out this year?

1
aband0nship•

I'm at a cach 22 with that.. i wanna buy a X10SRA-O which works with the 2600 v4's but i don't have a v3 to use to upgrade the bios. I'm assuming you can't upgrade the bios without a processor (or the v4)? If that board had IPMI it might have worked. Any ideas?

2
worldlybedouin•

Yeah, I think you need a processor in the socket in order to get it to POST and get into the BIOS.

Edit: One more thing, the manufacturer will usually ship them with the latest stable bios...so if you wait a bit for older stock to run out at say Newegg or where ever, and the newer stuff to show up on shelves you may get the latest rev which works for v4.

2
aband0nship•

My question is will it post with a v4 to upgrade the bios? Literally the only thing holding me back from getting the 10 core 2630 or 2640..

2
worldlybedouin•

I'm willing to bet if the BIOS isn't the latest version it won't post with a v4 in the socket. In fact I'm fairly confident of this.

1
aband0nship•

My question is will it post with a v4 to upgrade the bios? Literally the only thing holding me back from getting the 10 core 2630 or 2640..

2
notacceptableOP•

I normally upgrade the firmware to the latest stable before doing much else on the motherboard. I'm not specifically looking for the v4 CPU.

2
worldlybedouin•

I'm mulling over a v4...not sure if I'll do it. I'm always nervous about BIOS upgrades. My history with that process has been about 50/50.

1
notacceptableOP•

They can go rough, but I worked at a DC for a while that used supermicro primarily and we had flashing the bios as a latest version as part of every os reinstall/new deployment.

I probably only dealt with 2 or 3 boards that failed during bios updates in 2+ years there, and deployed hundreds of servers a week (sometimes a day >.>).

The one thing you have to be careful with is Raid Card firmware versions! Pay very careful attention to the release notes on those heh.

2
worldlybedouin•

Yeah, as much as I wouldn't mind upgrading to a v4, my current ESXi box is my "all-in-one"...so if I bork the BIOS I'm not only dealing with downtime on the homelab setup but also my daily driver desktop. So I'm just debating the risk v. reward.

Good to know Supermicros have a good track record on bios updates. Regardless of the bios/firmware update for any device, I re-re-read the documentation to make sure I understand and double check. As I said, I've got a bad update history so I'm that much more paranoid.

1