Thunderbolt 3 firmware out for GA-Z170MX-Gaming 5 (Micro ATX) and GA-Z170N-Gaming 5 (Mini-ITX)
So I've been checking out some boards for a future build and noticed that these two boards have got a firmware update to enable Thunderbolt. I haven't seen any news on these two boards receiving such an update, but it's clearly there under Support and Drivers as "Thunderbolt driver" and a USB 3.1 FW Update tool under "Utility".
GA-Z170N-Gaming 5
http://www.gigabyte.com/products/product-page.aspx?pid=5529#ov
GA-Z170MX-Gaming 5
http://www.gigabyte.com/products/product-page.aspx?pid=5530#ov
I haven't confirmed if these are legitimate, but it could influence some builders looking for the feature.
Edit: Some users on Hardforum have applied the update on the GA-Z170N and it seems to be for real, but no testing with a TB3 device has been carried out.
https://hardforum.com/threads/skylake-based-z170-gaming-mini-itx-motherboard.1864902/page-21
Edit No. 2: Had a further look into this and it seems the update is available to all motherboards using the Alpine Ridge controller.
Other models that the update is available for are as follows:
GA-Z170X-Gaming 6
GA-Z170X-Gaming 5-EU
GA-Z170X-Gaming 5
GA-Z170X-Gaming 3-EU
GA-Z170X-Gaming 3
GA-Z170X-UD5
GA-Z170X-UD3
Posted Jun 7, 2016, 3:10 AM UTC · edited
Interesting. I have the Z170MX-Gaming 5 in my gaming rig. No TB devices, but I suppose I can slap the driver and firmware update in and see if it actually works.
edit: Installed the TB software, did the USB FW update. After TB software it did complain at login that I 'might need an update' for something to work. After USB FW update, it hasn't repeated that message.
Seems to think I have TB3, now: Imgur
Thanks for investigating that, dude! That's pretty cool that it seems legit.
It's odd how the software is reporting 2 ports, maybe the Type A 3.1 port also works as Thunderbolt too?
Thunderbolt requires the extra pins of the type C connector, so the software might think it can, but in reality, nope.
If I'm reading and understanding Intel's Alpine Ridge controllers correctly, TB3 would only work over the Type C port, but I believe the Type A 3.1 port and the Type C port come off the same controller so it's possible it doesn't know one's 'only' Type A.
Is there any update on whether the USB 3.1 port on the Gaming 5 can be used as a full fledged Thunderbolt port (meaning driving thunderbolt 3 or 2 devices such as the thunderbolt monitor...)