newbie re-doing a rocking horse, advice and tips, please?
https://imgur.com/gallery/RWqZl So, I've been trying to get into this craft for awhile. :) Recently I found a wooden rocking horse at the thrift shop, for $10!! I am so excited, I race home every day now for this thing. It has to be pretty by Christmas for my godson as a 1st birthday/ Christmas gift (and before you Christmas birthday people ask: yeah, he's getting more stuff to keep the days separated but this can be for both imo). He is already a very boisterous little boy at 10 months, this horse has got to be tough. So if there's any tips about strengthening this, I would welcome them.
I took his legs and rockers off because they needed to be screwed on tighter and with better screws (the builder used drywall screws, I guess?), took off the eyes/ears/reins and started sanding him smooth. I think whomever made him was also a beginner lol, he was super rough, couldn't even 'pet it' without splinters, and kinda wobbly. Good bones though, I think.
My steps that I know so far now are: sand it until it's soft, stain it, screw it back together (I splurged and got some pretty brass screws for the visible ones) and use tung oil to finish it. I have minwax chestnut stain, some unknown number gritty as heck paper and some 'p220' paper, some minwax tung oil, and murphy's orange cleaner to wipe down as i go.
I have no access to power tools, outside of a borrowed drill, so my questions are:
-is my using some really gritty paper my dad had appropriate for shaping the legs better? is there a faster way, by hand? I am hoping to give him just a little bit more of a knee in the back but nbd if that doesn't happen.
-is sanding and tung oil the best way to get the high shine I want that will stay bright and clean? I was thinking sometimes when you use a finishing high gloss product -like those ones that are basically clear paint- it gets finger prints pretty easily, and i want to avoid that, for the sake of his mother's ocd. should i just forsake gloss and go matte? is 220 enough for that super-soft feel?
-whomever made it drilled the screws in really deep in some places, should I put putty down in the holes for when it's time to re-screw it so they sit flush this time? i want them to show. I was informed by the nice man at the store about screw sizing for when you replace them in the same spots, and I think that aspect is covered; I just don't want anything anywhere to be loose. The boy is very strong for someone who can barely stand up yet haha.
-do i need wood pre-conditioner like the stain says? can i just use some old English oil and call it good? what's this step about??
-if i sand the bottom of the rockers really well, that should keep their floors from getting scratched, right?
-should i paint the eyes (just using acrylic black paint, unless someone says to do otherwise) before i stain, or after? i don't want them to chip, i see this thing getting dragged around and probably hit a few times charging into battle haha
-i got these things that are basically hoops with screws attached (some sort of picture hanging do-dad i think) for attaching the reins better but the screw part is only about half an inch long. will that hold up to being tugged on? is there a way i can help those stay in better? put in wood glue or something first? worried they wont bite into the wood enough to stick.
thank you for your patience, I am bubbling over with newbie excitement over this. if someone has reputable links for answers, that would be really neat, too.
TL;DR newbie has a lot of questions about staining, putty and sanding and screws. thank you everyone!!!!!!
Posted Sep 12, 2016, 7:26 PM UTC
Where to start. Put (get ready for it) toothpicks in the screw holes with Tightbond glue. They will greatly strengthen the screws. Let it dry before putting it together. Drywall screws are actually good because they have coarse threads. The best thing you could do it glue it all together. That will last much longer. You screw it together so you can take it apart. Why bother. Just put it together well. You need wood on wood for the glue to work. i.e. no finish.
On finish. If it has some kind of finish like varnish etc, and it has splinters then you kinda need to start over on the finish. That is going to mean a lot of work. But worth it in the end. There are a lot of good natural finishes. I like shellac. It is naturally occurring. Tung oil works great too. But is a tad expensive. http://www.make-baby-stuff.com/natural-wood-finish.html You are likely going to need to stain it since it was finished before. Just use water based stain. Or, if you can find it aniline dye. The key to the finish is PRACTICE on something first. I'll say it again, practice.
Edit. Looking at the pic again, it really comes down to the splinters. You might get away with the scotchbrite sandpaper. And it doesn't have to be perfect. Lord knows a child is going to put a lot of wear and tear on it. Give it an antique look. And those plastic eyes are a choke hazard IMHO.
I have a big rocker from Harvard I sit in all the time. I have something like this on the bottom. It works. http://www.lowes.com/pd/Waxman-Brown-Square-Felt-Pad/3047456?cm_mmc=SCE_PLA-_-ToolsAndHardware-_-FloorProtection-_-3047456:Waxman&CAWELAID=&kpid=3047456&CAGPSPN=pla&store_code=2589&k_clickID=5b5ee93b-cf44-8989-12bd-00007b82c579
Thank you for all your advice. The toothpicks idea makes a lot of sense, I will try it and be sure to let everything dry well. I was going to try and find some glue anyways on my next trip to the store; I still do want to use the brass screws in certain places simpler because I like the look of them, but gluing all the meeting points makes good sense too. There was no finish on it at all, it was just plain unfinished wood, it was barely sanded honestly. I haven't heard of aniline dye, I will look it up. What is the reason for using water based stains? Does it last longer? I have lots of wood I can practice on, I set some aside already for that, we have a good sized scrap pile here :)
The eyes are long gone, as it is the hot glue that held them :) I didn't think they looked too safe, myself, and they were turning yellow... Kinda creepy looking.
Good ideas, thank you. Writing it all down now :)
You have to think about little tikes gnawing on things. Or choking. The same with the little rope bridle. There are kid safe finishes out there. Tung oil, shellac etc. Have fun, is the most important part.
thank you for your input :) i was going to go with rounded edges whenever i could, and make everything as soft as possible.. you're right, everything goes into this kid's mouth haha