Troubleshooting help - error 400 and 109
Hey guys,
Like some others I've ended up getting error 400. I've tried several solutions on the infamous Error 400 thread from the steam forums and still nothing. At this point I'm hoping I can describe the symptoms and possibly have someone with a similar setup or set of issues spot something that I've got wrong.
My setup:
I'm running on a GTX 690 (i know its not the best but performance wise it should barely fit the bill for now) which has 3 DVI ports and a mini displayPort on the back. I'm running 3 monitors on the 3 DVI ports and I'm attempting to run the Vive on the mini displayPort via a mini displayPort to HDMI cable (6ft long if that matters). OS is windows 10 and I've got the latest Nvidia drivers (372.90)
So as of right now when I start in direct mode, the HMD stays dark and everything has a green light. SteamVR will give me a steam popup saying error 109 while SteamVR has a constant window hovering over the main window that says "compositor is not available" in red with error code 400. However, all the devices will be green and I have green LEDs on all of the devices as well.
When I switch off direct mode, Nvidia will detect an additional display which I can extend the desktop to. The HMD will only have the right display light up while the left display is still dark. The display will show the desktop though but due to the strange configuration it is only a 720x480 resolution display. Now when I turn on SteamVR it will give me error 208 where the HMD cannot be found. None of the icons for the devices will be green.
I'm pretty much at a loss for solutions right now. Does anyone have any ideas about what I can try?
So far I have:
- switched the USB ports
- booted with less monitors, 3, then 2, then 1 and then 0 monitors on the gfx card
- disabled direct mode which resulted in the symptoms above
- entered the beta for steamVR
- reinstalled the usb drivers for vive
- updated to latest nvidia drivers
- power cycling devices, and fresh restarts on the computer
Also here's the log for the vrcompositor if it explains at all what is happening:
Tue Sep 27 2016 21:26:41.078 - VR compositor (v1474430817) starting up
Tue Sep 27 2016 21:26:41.078 - RuntimePath : C:\Program Files (x86)\Steam\steamapps\common\SteamVR\
Tue Sep 27 2016 21:26:41.091 - Events created
Tue Sep 27 2016 21:26:41.097 - Initializing generic graphics device resources...
Tue Sep 27 2016 21:26:41.101 - Headset is using direct mode
Tue Sep 27 2016 21:26:41.122 - Initializing CD3D11VRRenderer
Tue Sep 27 2016 21:26:41.134 - Creating nvapi display
Tue Sep 27 2016 21:26:41.139 - NvAPI: Failed to set direct display mode! Error='NVAPI_TIMING_NOT_SUPPORTED'
Tue Sep 27 2016 21:26:41.139 - Failed to create render targets for NvAPI display in direct mode!
Tue Sep 27 2016 21:26:41.139 - Failed to initialize compositor
Tue Sep 27 2016 21:26:41.139 - Failed to start compositor: VRInitError_Compositor_Failed
EDIT: Thanks to Shadaez, I got an dvi - hdmi converter and now everything is working just fine
Posted Sep 28, 2016, 4:54 AM UTC · edited