Homebrewers of San Antonio, I have a question.

Need Advice

I've been contemplating using the tapwater for my brewing as i brew 15 gallons per month. The only roblem i can see myself having is that the water is severely riddled with hard minerals. In my electric kettle i have to run vinegar thru it every few weeks to clean the white scale out. Do any of you have similar water, and do you bre with it? I also do not have a filter for the water.

Posted Oct 7, 2016, 2:04 AM UTC

45
digital_misery•

I haven't had too much of an issue brewing with the tap water. Just gotta make sure to clean everything really well and dry quickly so none of the water sets.

3
cloudymind87OP•

Okay cool. I've had no issues cleaning/sanitizing with the tap but i was worried about those hard minerals doing goofy stuff to the boil.

1
VileContextBeggin' strip tacos... dogs don't know they're not real tacos•

Tap water is just fine to brew with. Grab a SAWS water quality report to begin with. It will tell you hardness along with trace minerals that are in our water supply.

There are many charts online that will show you what styles do best with regards to PH and water hardness. Last time I looked, we were pretty close to Dublin's water hardness, so making stouts are a good bet with SA's water profile.

This also depends if you do all grain or extract brewing... Extract brewing is way more tolerant to tap water variations.

Have you ever tasted Shiner's tap water? To me its not pleasant at all and has a methane type note regardless of charcoal filtering ive used, yet Shiner aint a bad beer.

Good luck and keep brewing!

2
MasterBettyFTW•

2 stage charcoal filter [2-10" filters connected inline] and run no more than 1/2gal per minute will get almost everything out of the water, even chloramines

1
Kylebearz•

Local tap water in different areas is what gives beer it's personality. I homebrew here and use tap water and it's just as good as when I used Colorado water when I lived there.

1