How difficult is printing TPU compared to PLA and is does TPU have toxic fumes like ABS?
I need to print some parts for my drone and I would like to print them in TPU. However i've only ever printed PLA with my printer. How much more difficult is it to print TPU and do I need the ventilation for TPU as ABS does?
Posted Oct 16, 2016, 10:07 PM UTC
55
I have printed with TPU and been in the same room. I didn't smell any strong toxic fumes or anything. You do have to print TPU much slower than PLA. I print it at no more than 20mm/s.
Thanks for the info. Is it as flexible as it seems? And I'm glad to hear you didnt smell any strong toxic fumes. My printer is in the same room as my computer room which I spent most of my time in. Does TPU need to print really hot or is is the same as PLA (190 - 210) ?
It is pretty flexible...depending on the infill and part that is. I printed a marvin (not sure what infill it was, but its squishy, but still takes some force). It is a small marvin too. I printed my wife a phone case for her nexus 5x and its super flexible, meaning i can bend it completely backwards and what not. My temps are as follows: Hotend = 215, Bed = 80
I print with a lot of flex filament (semiflex and sainsmart mostly). Don't worry about heating your bed, it's unnecessary. Hot end is in the 215-190 range. I love printing it on kapton because the bottom is super smooth, painters tape also works. Increase your retraction distance, make sure you don't have any gaps in your extruder feed - Teflon guide tube the entire distance, and you'll want to slow everything down. Ninjaflex I print at 20-30 mm/s, semiflex 30-50 mm/s, and sainsmart 40-60 mm/s.