r/telescopes•
Beefki

Bought a used Meade 114EQ-DH for $30, needs some repair

Got it from Craigslist. I was actually pleasantly surprised at how well the scope itself was. It could use a new focuser but what's there isn't terrible, and I need to phone Meade about getting the 1.25" eyepiece holder. It of course also needs collimation but that's hardly an issue.

The mount has seen better days though. There are no counterweights, nor the rod that holds them (which clearly broke off, leaving the old mounting holes unusable). It also seems to be missing the slow motion knobs.

I'm hoping to repair the stand well enough that it can be usable. Things like the knobs and the weights I'm assuming I could purchase from Meade or another seller for relatively cheap. I'm a little more worried about the broken/missing counterweight system. My brother is a machinist and could make a replacement, but I need to make measurements and a schematic.

I was looking for advice on what the best way to go about fixing this would be, and see if anyone already had a schematic so I could avoid having to make one for myself. Thus far, I was thinking of having him fabricate a solid metal rod that would fit into the existing underside, and drill new mount holes so I could use a nut and bolt to hold it steady. Is this realistic? Is there a better solution that I've not thought of (and isn't buying a new one)?

EDIT: I'm an engineer and my brother is a machinist, between the two of us we can make just about anything out of metal without much trouble (although we're both busy so it takes time). I'm not worried about being ABLE to do this, if nothing else it's a fun project for the two of us to work on, I was just curious if someone potentially already had tried something like this and perhaps could have saved some time by sharing information that worked for them.

Posted Nov 22, 2016, 10:55 PM UTC · edited

36
Cosmoteer•

It's going to be somewhat expensive to fix. And don't bother with a focuser - most alternatives won't fit. I would recommend converting it into a dobsonian.

4
BeefkiOP•

Yeah, I'm definitely considering the option of converting it to a dob and probably will at least make a rocker box that I can use it with when I want to.

The only reason I'm trying to fix the EQ mount is because I've been looking for a project to work on with my brother. I have access to all the tools I'd need and can get the materials at cost. Plus I don't have an EQ yet and I have a small refractor I could put on it too.

2
OrionsArmpit•

I'd replace the mount with a dob style instead of trying to fix a eq. Another option would be a hefty pipe mount, that style works well as a pier.

Rebuilding a EQ requires a decent amount of engineering knowledge/skills as well as a metal shop with the tools needed for all the machining etc.

Looks like that focuser is a strange 2" focuser that holds the .975 eyepieces, and includes some cheap/shoddy eyepieces. Supposedly meade will send you a 1.25 adapter for free. I'd try that, then keep your eye out for some inexpensive (or used) plossl eyepieces. I have 25mm and 10mm plossls I got for $10-15/each a few years back that I use in my budget scopes and they are probably the best money I spent on my tasco 114 and tabletop 76 scopes.

2
BeefkiOP•

So far I'm thinking I may make the dob mount regardless of fixing the EQ. It would be nice to switch to the dob when all I want is point and view.

I do still want to work on the EQ though. I am an engineer and my brother is a machinist, between his available tools/materials and a couple of nearby makerspaces I already have the needed items. Now I just need a free day to make the schematic.

Providing it doesn't blow up in my face somehow I'll probably post pictures once we're finished

1
OrionsArmpit•

Good luck. I used to read the cloudy nights forums regularly, specifically the diy sections, and I don't remember ever seeing a eq rebuild. But Cloudy Nights might be a good place to search/repost this question

2