PF Tek / SGFC - how much misting?

I'm doing BRF cakes in an SGFC. I understand I should mist three times per day, and that it's encouraged to mist directly onto the cakes.

My question is, how many shots should I give them? I've got a fairly large squirt bottle, and it puts out a decent amount of mist. Three shots? Ten? Twenty? What would be overkill?

edit: I should add, there are five cakes in the chamber, which is approximately 12" x 12" x 22", and has about 5 inches of perlite in the bottom. I also have a shitty hygrometer that won't got above 80 even with a wet paper towel wrapped around it. In the chamber it usually hovers at 70, drops to 60 when I fan, and then climbs back up to 70 after I mist and put the lid back on for awhile.

Posted Dec 1, 2016, 2:37 PM UTC · edited

14
Zoo_Cult•

Don't directly mist cakes once it pins, and second what Magoo says about standing water on cakes. Also, the order of things; you want to fan after you mist, the evaporation from the fanning is what brings humidity which is a pinning trigger. Keep us updated!

Edit: most to mist, auto-carrotcaked

2
randomtextnameOP•

Thanks for your response. The people in this sub are so helpful.

1
Monsieur_Magoo•

So the way I do it is take the lid off, step back a step, and mist over the whole box so the walls get some water on them as well (don't specifically water the walls, just get the whole box). You want there to be fine mist droplets on the cakes, not full water drops of water. It's always just a balancing act - If there's still drops when you go back, it's too much, just don't let them dry out too much either - you'll figure out what works best for you. Don't worry about the hygrometer as long as there's visible moisture in the chamber on the walls.

1
randomtextnameOP•

Thank you, Monsieur. This is very helpful.

1