[HELP] Let's Split not working correctly, strange layout.
I was fortunate enough to get a set of the Let's Split PCBs from Switchtop. I put together one of the sides and flashed the pro micro with the default layout, but only certain keys are working and everything is shifted in a weird way?
Hopefully the formatting comes through...
Default layout:
- ,----------------------------
- | Tab | Q | W | E | R | T |
- |------+------+------+---
- | Esc | A | S | D | F | G |
- |------+------+------+----
- | Shift| Z | X | C | V | B |
- |------+------+------+----
- |Adjust| Ctrl | Alt | GUI |Lower |Space |
- `----------------------------------
My Let's Split
- ,----------------------------
- | Alt | ? | ? | Space | ? | ? |
- |------+------+------+---
- | X | C | V | B | ? | ? |
- |------+------+------+----
- | S | D | F | G | ? | ? |
- |------+------+------+----
- | W | E | R | T | ? | ? |
- `---------------------------------
Calling u/wootpatoot, please help!
Posted Dec 16, 2016, 3:24 AM UTC
410
what firmware did you flash? my first guess is that you are running v1.
Hmm might have been too old, I pulled it down a couple weeks ago. I'll give that a try, thanks!
does it have the revision folders in there?
It did not have the revisions, good call. I re-made the hex file and flashed and it seems to have flipped around most things to the correct orientation.
Seems my Ctrl is where Q should be.
Esc and Tab are switched.
I think the rest are correct.
link your keymap please?