Constant issue of expanding rubber seal on top cap from my Crown 2 tank [PICS]

Just got my Crown 2 tank to replace the crappy Rafale. First few weeks was excellent. I use a 0.5 ohms stock coil at 40 Watts on my Kbox 120 mod, roughly around 4.5 volts.

Then I noticed it starts to leak after the 3rd times I changed the coil. When I opened the top and tried to clean, I noticed the rubber seal on t top cap expanded (probably due to heat) and cause it to not make a tight seal and leaks out juice. This is the 2nd time it happens. I used up the spare seal on the package.

 

Pics: http://imgur.com/a/AcHl8

 

in the pics, once I removed the rubber seal to clean, it's impossible to put it back it without cutting it to fit. Is that a fix?

Anyone out there having similar issues on their Crown 2 tank? What is your fix on this?

Posted Jan 3, 2017, 9:18 AM UTC

36
KETOS1SGoon RDA Smok Alien Master Race•

Wow this is really bizzare. I'm waiting on new coils for my Crown II so I haven't used it much lately but I've never had this issue and I vape at higher wattage than you. I have the Black Crown II so maybe it has something to do with that one being copper? Possibly retaining heat more? You could try hitting up UWELL customer support but I've yet to hear if they're actually helpful or not...https://myuwell.com/pages/contact-us

2
Robert_Cromwell•

Maybe something in the juice you vape?

1
Crankshaft67Watts your resistance•

Likely expanded due to flavoring in juices you are using. (Pineapple did it to mine)

I had issue with a bottle of juice and O-rings/seals before too, just remove an wash in warm soapy water an leave to rest for a couple hours or a day and most of it will return to original shape.

1
WaltonGogginsTeeth•

This is exactly it. I've had two juices that contain pineapple do this to my silicone top sealing pads in TFV8 babies.

You can rinse in alcohol/water and try to let dry out and they can sometimes shrink down but in my experience if they went too long they will never shrink back down. I don't know about the Crown 2 since I shelved mine after the coil disasters.

3
Trendiggity•

The newest iteration of the coils are much improved over the ones available at launch. I can routinely get 100ml through a coil no problem now (I'm not a heavy user so this will last me upwards of a month).

I still poke/tear the outer cotton layer though.

1
aclapp1626•

Typically this is caused by citrus juices. When you clean it, set it aside for a little bit and rotate using the spare oring that came with it. This will help to prevent it from falling apart sooner because these eventually tear. Just let them come back to their natural form, dont throw away, and you should be fine. It normally only takes a couple hours for them to return to normal, so just rotate out and you should be fine.

1