r/olkb•
KeyboardFire

"t" key is acting strange

Recently, the "t" key on my Planck has been rather problematic. Sometimes it doesn't work (pressing it does nothing), sometimes pressing it inserts two "t"s, and sometimes pressing it in quick succession with another key will input the keys in the wrong order ("baths" becomes "bahts" or "bathts").

The problem usually persists for a while, then stops happening for a while, and so on. Sometimes shuffling the keyboard around in its case or loosening the screws will fix it for a while, and it seems to happen far less frequently when the keyboard is outside of its case entirely.

The only thing I can think of is a problem with the soldering, and looking at the solder joint, it appears that I did do the worst soldering on the "t" key. Could that be causing the problem, or could it be something else? Here's a picture (it's the one in column 5).

Posted Jan 21, 2017, 9:06 PM UTC

12
gentlegiant1972•

That soldering job is pretty rough. Check out this video from EEVBlog. It looks like you didn't use enough solder on a bunch of your joints.

4
jackhumbertOrtholinear Overlord•

Wouldn't hurt to reflow the solder a little bit! :)

3