loss of pressure after installing PEX

So Im an idiot, and I've created a problem for myself out of nothing.

I replaced a small section of copper pipe with PEX on the basement lines that run to my kitchen sink.

http://imgur.com/a/FwSoH

The plan was to put in a T to connect a laundry tub while also removing some of the old plumbing(including a leaking garden spout and a valve that went nowhere, old hammer arrestor) But when I did that, I lost pressure at the sink, so I replaced the T with an elbow to simplify things during troubleshooting

see here the parts I removed.

I used 1/2' PEX, quick-connect fittings and 2 shark-bite fittings I had on hand. Switching in the PEX was easy enough, but as soon as I did that, I had a significant pressure loss at the kitchen sink directly above it.

Any tips on diagnosing this? Should I reinstall the hammer arrestor?

Pressure in the rest of the house is great, but i cant get the kitchen tap back to normal.

Posted Feb 17, 2017, 4:21 PM UTC

211
ParksVS•

Check your aerator for debris and sediment.

9
CurriedFlavours•

Yep. Odds are it's crud in the aerator.

3
JamesNonstopOP•

aerator looks clean. No visible issues there

1
ParksVS•

Exercise the shut offs under the sink. Sometimes they get crud in them.

2
JamesNonstopOP•

thats my next step. Im going to check the flow there after the stops/before the tap

1
JamesNonstopOP•

I found a second screen deeper into the faucet. It was very clogged with debris.Thanks guys!

3
BuckNeckit•

Faucets have so many check valves and shit now you'd be surprised how many screens and such you would never guess will fail

3
ParksVS•

There it is! Glad we could help.

2
Syre22•

At any point did you t off the half inch?

2
JamesNonstopOP•

when I first put it together, I had a T off the 1/2 connecting to the laundry tub.Thinking that might be the cause of my pressure issue I disconnected that and put the elbows on you see in the picture.

1
Syre22•

Then it's some kind of blockage somewhere.

1